Page 1 2
Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
anyone have a problem with the drivers-side grab bar(plastic piece on interior a-pillar) always loosening, then breaking? There is a plastic cap covering a slot where a bolt is located that tightens the plastic piece to the body....problem is, inside there, where the bolt tightens is all plastic... the platic up in there is breaking and it won't tighten anymore..... any ideas??
thanks! |
|||
|
|
"Josh" President, Georgia Chapter  |
Mines been broken for months
 Aside from buying a new a pillar, I cant think of how to fix it.  Both bolts ripped through the plastic on mine. |
|||
|
|
"Josh" President, Georgia Chapter |
Anyone with a spare A pillar from mounting a guage pod or something, please let me know!!
|
|||
|
|
"Josh" President, Georgia Chapter |
Found this...
http://www.conquestauto.com/se...h-3500-Driver/Detail but hopefully someone has an extra laying around
|
|||
|
 |
Well guys,
Mine broke today and I am having a hard time getting the bolts out. The problem I have is that the bolts are turning in the hole kindda sort of. The part that sits in the pillar is turning. I need to find out a way to get this part out or something before I install a new pillar cover with a tranny cauge.wich would be a new mod for me on my truck. anyway if there is anybody that had this problem please let me know how to fix this. I am almost to the point of puttin a weld on it or something, it looks like a insert to me but it's turning. thanks henk What would a pilot do without a crewchief!!! _______________    |
|||
|
|
"Josh" President, Georgia Chapter |
I had the same problem trying to get mine off the first time. The bolt is out, but its still stuck in the plastic turning forever! I just yanked at it hard as hell and it came off. Broke it even more, but it was already pretty bad. Might be able to get at it with some really skinny needle noses. |
|||
|
"Rob" VP Alaska Chapter  |
  2008 Dodge Durango 4x4 SLT HEMI and 2007 Dodge Ram 1500 4x4 SLT Quad Cab HEMI www.lubedealer.com/99705/            April 25, 2007!! |
|||
|
|
"Pimp Daddy Dave" President NJ Chapter HTC.com Statistician Truck of the Month July 2008  |
Josh, I have a drivers side a pillar off my 04 if interested.
Drive it like you stole it  Visit my web page http://www.angelfire.com/planet/hemidavek/index.html Stock: 350HP @ flywheel 245RWHP MODS:400HP @ flywheel 315RWHP (est) Best mod of all, my WIFE Susan :-)                        |
|||
|
 |
I just put in a 3-gauge pillar pod mount and have a spare oem pillar with handle also. I never had any trouble out of mine. I'd sell it if someones interested.
Ian - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - '04 Ram 1500 4x4 - Silver w/ Custom HEMI Stripe '05 Suzuki GS500F - Blue/White Mods: GlowShift Trans Temp Gauge GlowShift Oil Temp Gauge GlowShift 3-Gauge Pillar Pod SuperChips 3815 Taylor Shorty Wires NGK Spark Plugs Torsion Bar Cranked - 2" LaBra Tonneau Cover 5% Window Tint 360*               |
|||
|
|
"Tracey" Truck of the Month June 2009  |
If just the holes are broke out. Rough up the plastic real good down around the holes. Then put a piece of tape over the holes. Then take a two part epoxy and mix it and pour it in there. Let it harden and drill out the holes.
|
|||
|
|
"Alex" Truck of the Month February 2007  |
First off, I'm glad I found this thread. I was starting to think that the shop that installed my alarm was to blame for this. Not too sure how I feel now that I know it was my fat ass' fault haha
This is pretty much the route I was going to take, but I was going to take it one step further and figure out a way to embed a thin sheet metal strap in there to strengthen it up a little. I hate having to pull on my steering wheel to get on the truck. 2004 Bright White Quad Cab SLT AIRAID Intake Gibson Split Rear Exhaust Superchiped 5% Tint all around Rough Country 3" kit (2wd) 305-65-17 BFG's on Cruiser Wheels Some Audio Mods Lots of Polish and Pimp Juice - - - |
|||
|
"Robert"  |
I don't know of anyone that uses them. I thought they were just for looks. sometimes I'll hang a shirt on it. |
|||
|
|
"Steve" VP TN Chapter  |
My wife broke mine off. Got a new one from Art at Henson Motorsports cheaper shipped the my local dealers stock.
04 Ram 1500 Hemi SLT, K&N CAI, Flowmaster 50 series, Billet grill, Billet gas door, Taylor shorties, NGK 4306, NAPA high Performance Rotors and pads (all 4), Extang Tonno, More to come... http://profile.myspace.com/ind...le&friendid=41540334     |
|||
|
|
"Mark" Forum Manager Former Hemi truck & Hemi SUV owner  |
Heard Superjay say the same thing just this past weekend  ______________________________________________________________________________ HTC.com web site HTC.com store HTC.com calendar HTC.com National map After smoking a pack a day for 30 years, I quit cold turkey. Here's how I did it...  2003 Ram 5.7 Hemi - Supercharged. 520 HP, 14 mpg... traded in for a 2006 SRT8 Grand Cherokee - bone stock 6.1 Hemi - 420 HP, 16 mpg... traded in for a 2007 BMW 335i - twin turbo. 330 HP, 33 mpg          |
|||
|
|
"Bob" President AZ Chapter Truck of the Year 2008 Truck of the Month April 2008  |
 04 RUMBLE BEE #4669 Yellow MODS :Stu's Spartan cam on 113 lsa,L/T Cerimic coated headers & y pipe,E-Fan,180 T-Stat,E-Cut Outs, Posi 456's, Shortie Wires,CAI, 06 R/T Daytona Charger top banana yellow #93        |
|||
|
|
"Rob" VP Alaska Chapter |
2008 Dodge Durango 4x4 SLT HEMI and 2007 Dodge Ram 1500 4x4 SLT Quad Cab HEMI www.lubedealer.com/99705/ April 25, 2007!! |
|||
|
|
"Pimp Daddy Dave" President NJ Chapter HTC.com Statistician Truck of the Month July 2008 |
So is it safe to say that Jay is back to 1 again ???? Drive it like you stole it Visit my web page http://www.angelfire.com/planet/hemidavek/index.html Stock: 350HP @ flywheel 245RWHP MODS:400HP @ flywheel 315RWHP (est) Best mod of all, my WIFE Susan :-) |
|||
|
|
President Alabama Chapter  |
______________________________________________________________________________ 2003 Ram 1500 SLT Quad Cab 5.7L Hemi "Lone Star Edition". Performance: Flowmaster Muffler with Dual Tips / Bomz Racing Dual Filter Cold Air Induction / Napa Cross Drilled/Slotted Rotors and Pads / Superchips 3815 Programmer / 3rd Strike Throttle Body Spacer / Royal Purple Oil and Wix Filter Appearence: Debadged except 2008 Lone Star badge on tailgate / Vtech Tail Light Covers / MAAP Step Rails / Mopar Ventvisors; Chrome Bug Guard; Chrome Fuel Door; Chrome Grill Inserts / LiteRider Bedcover / Streetglow Blue Under Car Kit; Tailgate Light Bar / PIAA Headlight Bulbs / DTA Chrome Lower Valance Audio: Pioneer Head Unit, AUX Port, and Amp / Audiovox XM Radio / Kicker Comp 12's / Phoenix Gold, Scosche, and Tsunami Wiring Components / Custom center console box and underseat amp rack coming soon. http://www.cardomain.com/ride/2958142 HTC Titan Killer   |
|||
|
 |
2006 Black Mega Cab Current mods: Access tonneau cover, 3rd Strike CAI,Tekonsha PRIMUS Trailer Brake Controller, Sumitt Turbo Muffler, Tow Mirrors, Tranny Temp Gauge in SRT A Pillar Pending Mods: Tuner, Tint Front Windows, Nerf Bars |
|||
|
My drivers side pillar also broke the other day and sent my ass right to the pavement. I just sat there with the pillar in my hand for a second wondering what the heck just happened lol.
If anyone has a spare one for sell e-mail me! epicure82@aol.com |
||||
|
| Powered by Eve Community | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
Copyright HemiTruckClub.com 2009