Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
 |
Looking for a double din dash for my 2005 1500 quad cab. The installers hacked up my dash and I can't stand looking at it! Does anyone know of an after market dash or does anyone know if there is an existing fiberglass mold? Any help would be really appreciated! My dash is an embarassment thanks to Sound Blazers in Coral Springs Fl doing a hack job!
*********************************************************************** 2005 Dodge Ram, ThunderRoad, Solar Yellow, 5.7L Hemi, SRT-10 Hood, 20" Wheels, Fiberglass Bed Cover, G.P.S., L.E.D. Taillight Bar, Invisible BRO (refuse to buy a RAMHAMMER) *********************************************************************** 1970 Dodge Challenger RT 383 numbers matching 4 speed A/C car ***********************************************************************    |
||
|
|
HTC Sponsor Henson MotorSports |
You're going to have to start from new on this one. No mold is out there to my knowledge and even the trucks w/ Nav in them used the standard opening in that year. Basically you need to just find a new dash bezel and either cut it yourself or take it to a reputable shop.
|
|||
|
 |
there is a company in germany that makes these
http://powercolor.de/shpSR.php?&c=e&p1=330&p2=338 i dont know much about them but they have them. i have read that they aren't to terribly hard to make yourself. just tedious 04 1500 QC Air Raid intake and tb spacer. AT 3030 muffler/ no cats taylor shorties hyperpac programmer 3/5 drop on 22's  |
|||
|
 HTC.com Audio Consultant  |
it's not that hard to customize the factory one,
just got to cover the stock opening with a layer of fiberglass then cut the size you need, sand and paint and it's done  Black 2004 Qc 4X4, Superchips,comp 260 cam,home ported & milled heads,6.1 spring and pushrods, PSC1, Taylor Thundevolt 50, Edelbrock TES headers, true duals with Magnaflow, K&N C.A.I., Innovate LC1, MarkVIII E Fan, 180* t stat,Hellwig RSB, 6 X HID,sport running boards and bed accents,lund rool pan, Kenwood KNX7100 nav., R camera, 80G hard drive, 9" flip down monitor, Phoenix gold Tantrum 600.4 for Diamond Audio 4.5" dash and R.F. 5" R doors, Orion Extreme 500.4 for HCCA 6S comps front door, Precision Power DCX 1500.1 for 2 X 10" RE Audio SE, Oxygen Audio 20 Farad cap, Rammat sound deadner, tons of wires  |
|||
|
|
|
1) Nice dash fab work! Can the center piece be entirely removed from the center dash? Also, what is the difficulty factor and how long did it take you?
2) I tried contacting the German Co. with the double din dash. I called (international call) and also sent a contact e=mail via their web site but have not yet received a response. I just happen to be German but my German speaking and writing is pretty bad. Maybe they thought I was not a serious buyer. I tried ordering the part on line via their web site but there is no option for delivery to the USA in their Country drop down boxes. *********************************************************************** 2005 Dodge Ram, ThunderRoad, Solar Yellow, 5.7L Hemi, SRT-10 Hood, 20" Wheels, Fiberglass Bed Cover, G.P.S., L.E.D. Taillight Bar, Invisible BRO (refuse to buy a RAMHAMMER) *********************************************************************** 1970 Dodge Challenger RT 383 numbers matching 4 speed A/C car *********************************************************************** |
|||
|
|
HTC.com Audio Consultant |
the center piece has a couple of melted tabs attaching it to the rest of the bezel but a little grinding or drilling can take care of that.
the difficulty factor from 0-10 a would say a 6 you also have to be patient with the finish, it takes time to make it nice and smooth and let the paint cure properly before installing it Tha company used to have the dashes on Ebay Black 2004 Qc 4X4, Superchips,comp 260 cam,home ported & milled heads,6.1 spring and pushrods, PSC1, Taylor Thundevolt 50, Edelbrock TES headers, true duals with Magnaflow, K&N C.A.I., Innovate LC1, MarkVIII E Fan, 180* t stat,Hellwig RSB, 6 X HID,sport running boards and bed accents,lund rool pan, Kenwood KNX7100 nav., R camera, 80G hard drive, 9" flip down monitor, Phoenix gold Tantrum 600.4 for Diamond Audio 4.5" dash and R.F. 5" R doors, Orion Extreme 500.4 for HCCA 6S comps front door, Precision Power DCX 1500.1 for 2 X 10" RE Audio SE, Oxygen Audio 20 Farad cap, Rammat sound deadner, tons of wires |
|||
|
|
|
that looks stock. i should have held out for a double din and not have been so hasty. good job
04 1500 QC Air Raid intake and tb spacer. AT 3030 muffler/ no cats taylor shorties hyperpac programmer 3/5 drop on 22's |
|||
|
| Powered by Eve Community |
 | Please Wait. Your request is being processed... |
|
Copyright HemiTruckClub.com 2009