Banners HemiTruckClub.com Website DiabloSport Website Superchips Website Henson Motor Sports Website 3rd Strike Performance We Support Our Troops United States of America Canada United Kingdom Belgium Iceland France Germany Puerto Rico South Africa Guam Netherlands

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Towing & Hauling  Hop To Forums  Moose info (Hemi Ram 2500/3500)    headers installed
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Russ





Picture of "*Damn*its*gotta*Hemi*"
Posted
ok boys and girls, got my gibson headers installed. took some minor tweaks, about 4 hours of work and we got them on. the minor tweaks are because the hardware that came with the headers were made so that it would bolt straight up to a stock exhaust. i do have pictures i took with my cell phone of my custom y pipe and installed headers.

i love them, havent driven hard yet, just got on it a few times. but as of now, i have a much mellower exhaust tone, and the typical drone i used to get from the factory logs is no longer there. it feels good, my long term fuel trims have balance a little better, but watching my air fuel ratio and it is quite apparent the computer is still learning the new flow. the af is between 14.5 to 15.1, where stoich is 14.7.

will keep you all up to date as i get a few more miles on it.




have had a stock, 6.1, 260, and a spartan cam. dont ask..

krc210 w/ 4 degrees cam, Sharadon Ported and Polished Heads, Gibson Headers, Cutout, AirRam CAI, Diablo Predator, Custom ypipe and Exhaust and more..

My Facebook - http://www.facebook.com/profile.php?id=581437357

HTC Titan Killer

Some Fun Stuff
6.1 best time
Reaction time: .039
60 foot: 2.394
1/8: 9.955 @ 72.482
1/4: 15.284@ 92.649

260 Best time
RT 0.136
60' 2.290
330' 6.440
1/8 9.849 @ 72.73
1/4 15.193 @ 91.853


 
Posts: 14126 | Location: Ceres, CA | Registered: 19 July 2004Reply With QuoteEdit or Delete MessageReport This Post
"Mark"

Forum
Manager


Former Hemi
truck & Hemi
SUV owner

Picture of MrHemi
Posted Hide Post
WTG Russ thumb2


______________________________________________________________________________

HTC.com web site
HTC.com store
HTC.com calendar
HTC.com National map
After smoking a pack a day for 30 years, I quit cold turkey. Here's how I did it... SmokeTip - The Most Advanced Electronic Cigarette

2003 Ram 5.7 Hemi - Supercharged. 520 HP, 14 mpg... traded in for a
2006 SRT8 Grand Cherokee - bone stock 6.1 Hemi - 420 HP, 16 mpg... traded in for a
2007 BMW 335i - twin turbo. 330 HP, 33 mpg

 
Posts: 29904 | Location: South Mills, NC | Registered: 19 June 2004Reply With QuoteEdit or Delete MessageReport This Post
Russ





Picture of "*Damn*its*gotta*Hemi*"
Posted Hide Post
lol, its only 5 years after i bought the thing that i get them installed. this really was what was keeping me out of the 14s. now i have the diablo on the way and it will be off to the dyno tuner to get me into the mid 14's. even have some 4.10 gears to install, someday...




have had a stock, 6.1, 260, and a spartan cam. dont ask..

krc210 w/ 4 degrees cam, Sharadon Ported and Polished Heads, Gibson Headers, Cutout, AirRam CAI, Diablo Predator, Custom ypipe and Exhaust and more..

My Facebook - http://www.facebook.com/profile.php?id=581437357

HTC Titan Killer

Some Fun Stuff
6.1 best time
Reaction time: .039
60 foot: 2.394
1/8: 9.955 @ 72.482
1/4: 15.284@ 92.649

260 Best time
RT 0.136
60' 2.290
330' 6.440
1/8 9.849 @ 72.73
1/4 15.193 @ 91.853


 
Posts: 14126 | Location: Ceres, CA | Registered: 19 July 2004Reply With QuoteEdit or Delete MessageReport This Post
Picture of spainy79
Posted Hide Post
Sweetness! Can't wait to see the pics.


Lee

'04 2500 QC LB 4X4

 
Posts: 2722 | Location: Sullivan, IN | Registered: 15 January 2008Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
good job buddy




My cammed hemi
http://www.youtube.com/watch?v=hw1lDSLSKgc

JOHNNYHEMI
Stu cam 218/218 112LSA spartan max, 6.1 rods, 6.1 springs,Tuned, Hedman Longtubes, Dual 3" dynomax bullets, NO cats, SRT-10 rear axel swap
D-60 LSD,4.10 gears srt-10 dual piston vented rear brakes
SHARADON STAGE III VALVEBODY, Lincoln 18" E-Fan,TransgoHDReprogram SHift Kit with resistor, Taylor Shorties,mcgaughys 2/4 drop, Custom painted bumpers, shaved and painted grille shell, rumble bee grille inserts, Debadged,
 
Posts: 798 | Location: Austin, Texas | Registered: 05 October 2007Reply With QuoteEdit or Delete MessageReport This Post
"Jeff"
Picture of EMS HEMI
Posted Hide Post
thumb2


2007 4X4 QC SB SLT BIG HORN SILVER AND 20' WHEEL'S,TOWING PACKAGE AND IT'S GOT A HEMI. 2" DAY STAR LEVELING KIT, DUEL EXHAUST WITH FLOWMASTER SUPER 44, MAGNAFLOW EXHAUST TIPS, OVAL STEP BAR'S, LINE-X SPRAY IN BED LINER, CHROME BUG SHEILD, RAIN VENT'S AND DIAMOND PLATE RAM HEAD ON BACK GLASS. AND MORE GOODIES TO COME.



 
Posts: 2683 | Location: HENDERSONVILLE, NC | Registered: 08 September 2008Reply With QuoteEdit or Delete MessageReport This Post
"Jay"



HTC Man of the Year - 2009

President, South Carolina Chapter

HTC.com Engine Specialist


Picture of Superjay
Posted Hide Post
thumb2


2003, Std. SWB, SLT, 20", 4:56 gear, AFE CAI, Superchip, 6.1 cam, 6.1 heads, Manley springs, retainers, pushrods, Edelbrock Hedders, 195 T-Stat, 8.2 Taylor, AEM, Power Wire, ARC-1,Amsoil Everything, and more. Veni Vidi Vici

HTC.com Titan Killer Club

 
Posts: 30494 | Location: Isle of Palms, SC | Registered: 20 June 2004Reply With QuoteEdit or Delete MessageReport This Post
"Brian"



Secretary,
AZ Chapter


Picture of Gila Hemi
Posted Hide Post
Sweet and about time Russ! thumb2 thumb2 I'm looking forward to the photos and dyno results. If they get you into the 14's, then I may just go with JBA after all, since they also make a Y-pipe for the moose, and the stock Y-pipe is a real POS.


If you don't trust us with our guns, why should we trust you with our government?

White 2004 RAM 2500 Heavyduty ST Longbed.

Check out my ride! (3/1/09)
WANTED: Tuned long tube headers and heavy duty traction bars...


Your ad posted here! PM me for rates!

 
Posts: 6532 | Location: Rio Rico, Arizona | Registered: 27 March 2006Reply With QuoteEdit or Delete MessageReport This Post
"George"


Picture of hemiram32
Posted Hide Post
thumb2


___________________________________________________________________________
2004 1500 HEMI SLT Offroad RC/SB, AWD, Airaid MIT, K&N Drop-In Filter, Duals with H-pipe, Thrush Magnum mufflers dumped, 2.5" leveling kit, 1.5" rear blocks, 35x12.50x17 Fierce Attitude M/Ts

myspace.com/mudslinger74


 
Posts: 1670 | Location: WV | Registered: 01 September 2007Reply With QuoteEdit or Delete MessageReport This Post


Secretary
Georgia Chapter
Picture of Hemi Steve
Posted Hide Post
thumb2


'04 1500,5.7 Hemi, 4X4, AWD, heated fold out tow mirrors, tow hooks, skid plates,titan gauges,"Undercover" tonneau cover,spray in bed liner, MOPAR chrome fuel door, billet "HEMI" door insert (Ranchers), SRT-10 Start Button(still trying to decide best way to mount?), 3rd Strike polished CAI, TB spacer, Outerwears pre-filter, NGK Plugs, Red 8.2mm Taylor Short Thundervolt wire, (BFGoodrich All-terrain A/T KO 285-R70-17-retired after 62,567 miles) BFG Mud-Terrain KM2 285 R70-17, IGGEE blue/black seat covers, Jet Stream Air Scoop / Power Wire, AT3030XL muffler, Super Chips 3815, Custom Rumble Ram 4X4 Bed Stripe, NAPA HP slotted/drilled rotors w/ceramic adaptive one pads, 5 speed automatic transmission,3.92gears,Patriot blue with chrome trim.

 
Posts: 1052 | Location: Jefferson, Georgia | Registered: 06 October 2004Reply With QuoteEdit or Delete MessageReport This Post
Russ





Picture of "*Damn*its*gotta*Hemi*"
Posted Hide Post
crappy pictures posted! here is the y pipe

This message has been edited. Last edited by: MrHemi,




have had a stock, 6.1, 260, and a spartan cam. dont ask..

krc210 w/ 4 degrees cam, Sharadon Ported and Polished Heads, Gibson Headers, Cutout, AirRam CAI, Diablo Predator, Custom ypipe and Exhaust and more..

My Facebook - http://www.facebook.com/profile.php?id=581437357

HTC Titan Killer

Some Fun Stuff
6.1 best time
Reaction time: .039
60 foot: 2.394
1/8: 9.955 @ 72.482
1/4: 15.284@ 92.649

260 Best time
RT 0.136
60' 2.290
330' 6.440
1/8 9.849 @ 72.73
1/4 15.193 @ 91.853




 
Posts: 14126 | Location: Ceres, CA | Registered: 19 July 2004Reply With QuoteEdit or Delete MessageReport This Post
Russ





Picture of "*Damn*its*gotta*Hemi*"
Posted Hide Post
driver side

This message has been edited. Last edited by: MrHemi,




have had a stock, 6.1, 260, and a spartan cam. dont ask..

krc210 w/ 4 degrees cam, Sharadon Ported and Polished Heads, Gibson Headers, Cutout, AirRam CAI, Diablo Predator, Custom ypipe and Exhaust and more..

My Facebook - http://www.facebook.com/profile.php?id=581437357

HTC Titan Killer

Some Fun Stuff
6.1 best time
Reaction time: .039
60 foot: 2.394
1/8: 9.955 @ 72.482
1/4: 15.284@ 92.649

260 Best time
RT 0.136
60' 2.290
330' 6.440
1/8 9.849 @ 72.73
1/4 15.193 @ 91.853




 
Posts: 14126 | Location: Ceres, CA | Registered: 19 July 2004Reply With QuoteEdit or Delete MessageReport This Post
Russ





Picture of "*Damn*its*gotta*Hemi*"
Posted Hide Post
passenger side (again, sorry for the crappy pics. I usually don't do that, but I had forgot my real camera that day!)

This message has been edited. Last edited by: MrHemi,




have had a stock, 6.1, 260, and a spartan cam. dont ask..

krc210 w/ 4 degrees cam, Sharadon Ported and Polished Heads, Gibson Headers, Cutout, AirRam CAI, Diablo Predator, Custom ypipe and Exhaust and more..

My Facebook - http://www.facebook.com/profile.php?id=581437357

HTC Titan Killer

Some Fun Stuff
6.1 best time
Reaction time: .039
60 foot: 2.394
1/8: 9.955 @ 72.482
1/4: 15.284@ 92.649

260 Best time
RT 0.136
60' 2.290
330' 6.440
1/8 9.849 @ 72.73
1/4 15.193 @ 91.853




 
Posts: 14126 | Location: Ceres, CA | Registered: 19 July 2004Reply With QuoteEdit or Delete MessageReport This Post
"Jason"
Picture of HoustonHemi
Posted Hide Post
Looks good. Notice any real difference yet?



2007 QC 1500 Lonestar Bright White
Debadged except hemi & dodge badges
Motive 4.56 Gears/ Jet Stream Air Scoop/ 3rd Strike Intake polished aluminium with amsoil filter and pre filter/ Hedman Headers/ Magnaflow x-pipe/ Two Aero Turbine AT2525s dumped under bed
 
Posts: 1173 | Location: Houston, TX | Registered: 21 August 2007Reply With QuoteEdit or Delete MessageReport This Post
Russ





Picture of "*Damn*its*gotta*Hemi*"
Posted Hide Post
thanks for the resize Mark... a lot better




have had a stock, 6.1, 260, and a spartan cam. dont ask..

krc210 w/ 4 degrees cam, Sharadon Ported and Polished Heads, Gibson Headers, Cutout, AirRam CAI, Diablo Predator, Custom ypipe and Exhaust and more..

My Facebook - http://www.facebook.com/profile.php?id=581437357

HTC Titan Killer

Some Fun Stuff
6.1 best time
Reaction time: .039
60 foot: 2.394
1/8: 9.955 @ 72.482
1/4: 15.284@ 92.649

260 Best time
RT 0.136
60' 2.290
330' 6.440
1/8 9.849 @ 72.73
1/4 15.193 @ 91.853


 
Posts: 14126 | Location: Ceres, CA | Registered: 19 July 2004Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community Page 1 2  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Towing & Hauling  Hop To Forums  Moose info (Hemi Ram 2500/3500)    headers installed

Copyright HemiTruckClub.com 2009