I have an Edge Evolution programmer in my truck (07 1500 Hemi) and had to send it back to be recalibrated, but left my truck programed. I then had a CB installed which tied into a wire in the truck so it would only work when the truck was running. The truck would remain running even with the key in the off postion and out of the ignition for about 3-5 seconds. My cruise control also stopped working. They shop un-installed the CB and the truck shut off properly but the cruise control still didnt work. I just reprogrammed the truck with the Edge and cruise control still does not work.

CAN ANYONE HELP ME!!??

try doing a "hard reset" diconect the battery and touch the positive with the negative cable, it might work

the wire they spliced into didnt have anything to do with the cruise control did it? check those splices, and make sure they are making good contact.

i will look and try the hard reset. they guy who installed it said he has done 30 or more remote starts in the same model truck using the same wire without issue.

i tried it all, and it still didnt fix it.

so i took it to Dodge and found out that a guy who put my lift kit on broke the connector for my speed sensor at the wheel this in turn disables the cruise control.

thanks for the help anyways