
HTC.com Forum
Forums
HEMI performance
Chips/Programmers
My Flashpaq 3865 holder for inside the cab|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
|
"Dave" HTC.com Man of the Year - 2008 VP Kentucky Chapter Truck of the Month April 2006 |
I used a Cobra radio plastic holder. I modified it a little with my Dremel tool to clear the cable from the 3865 and to make the clip fit. At the cubby hole under my AC controls I can peel up the forward edge of the rubber insert and fit the clip of the holder down in there. It seems to work fine. I haven't road tested it yet.
'05 RCSB 1500 SLT 5.7 Hemi Ram - 4" ram air from fog light hole - Amsoil drop-in filter - AirAid MIT - Taylor shorty wires - FM 50HD SI/SO 3" Magnaflow y-pipe - General Grabber UHP 295/50 20 tires - Superchips Flashpaq 3815 - Motive 4.56 gears - Detroit Truetrac differential Lakewood traction bars - PML differential cover - Best reaction time .011 @ Bowling Green Best 1/8 mile 9.28 @ Bowling Green - Best 1/4 mile 14.51 @ Bowling Green - ETs before gears, DTT, traction bars, improved ram air, and y-pipe |
||
|
|
HTC.com Audio Consultant |
that's cool, i was looking for one of them for my Cortex but i didn't know witch one to get
Black 2004 Qc 4X4, Superchips,comp 260 cam,home ported & milled heads,6.1 spring and pushrods, PSC1, Taylor Thundevolt 50, Edelbrock TES headers, true duals with Magnaflow, K&N C.A.I., Innovate LC1, MarkVIII E Fan, 180* t stat,Hellwig RSB, 6 X HID,sport running boards and bed accents,lund rool pan, Kenwood KNX7100 nav., R camera, 80G hard drive, 9" flip down monitor, Phoenix gold Tantrum 600.4 for Diamond Audio 4.5" dash and R.F. 5" R doors, Orion Extreme 500.4 for HCCA 6S comps front door, Precision Power DCX 1500.1 for 2 X 10" RE Audio SE, Oxygen Audio 20 Farad cap, Rammat sound deadner, tons of wires |
|||
|
|
"Dave" HTC.com Man of the Year - 2008 VP Kentucky Chapter Truck of the Month April 2006 |
On that clip there is a little plastic bump at the end of it that helps hold it to your belt. That bump was too big and wouldn't let the clip fit. So I ground that bump down until it fit. I love things like this where you use what you already have on hand. Didn't cost me a cent.
'05 RCSB 1500 SLT 5.7 Hemi Ram - 4" ram air from fog light hole - Amsoil drop-in filter - AirAid MIT - Taylor shorty wires - FM 50HD SI/SO 3" Magnaflow y-pipe - General Grabber UHP 295/50 20 tires - Superchips Flashpaq 3815 - Motive 4.56 gears - Detroit Truetrac differential Lakewood traction bars - PML differential cover - Best reaction time .011 @ Bowling Green Best 1/8 mile 9.28 @ Bowling Green - Best 1/4 mile 14.51 @ Bowling Green - ETs before gears, DTT, traction bars, improved ram air, and y-pipe |
|||
|
|
|
2006 Black Mega Cab Current mods: Access tonneau cover, 3rd Strike CAI,Tekonsha PRIMUS Trailer Brake Controller, Sumitt Turbo Muffler, Tow Mirrors, Tranny Temp Gauge in SRT A Pillar Pending Mods: Tuner, Tint Front Windows, Nerf Bars |
|||
|
|
"Dave" HTC.com Man of the Year - 2008 VP Kentucky Chapter Truck of the Month April 2006 |
By the way, with the clip installed I can still swing down my cup holders. It clears.
'05 RCSB 1500 SLT 5.7 Hemi Ram - 4" ram air from fog light hole - Amsoil drop-in filter - AirAid MIT - Taylor shorty wires - FM 50HD SI/SO 3" Magnaflow y-pipe - General Grabber UHP 295/50 20 tires - Superchips Flashpaq 3815 - Motive 4.56 gears - Detroit Truetrac differential Lakewood traction bars - PML differential cover - Best reaction time .011 @ Bowling Green Best 1/8 mile 9.28 @ Bowling Green - Best 1/4 mile 14.51 @ Bowling Green - ETs before gears, DTT, traction bars, improved ram air, and y-pipe |
|||
|
|
"Sil" |
That is so slick Dave. Nice job!
Sil 2008 Dodge Ram 1500 QC HEMI; Superchips Cortex 3950; Aero Turbine 3030XL; Magnaflow Y-Pipe; Hellwig Sway Bar |
|||
|
|
|
Thats kool.
|
|||
|
| Powered by Eve Community |
| Please Wait. Your request is being processed... |
|
HTC.com Forum
Forums
HEMI performance
Chips/Programmers
My Flashpaq 3865 holder for inside the cab
