Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
 |
I am thinking about buying the comp 260 cam. Tri power extreme. Does anyone have one of these installed or have any info on the cam? Also who would be able to install and tune it near western NC
05 hemi ram 4x4, cranked torsion bars,stage 2 afe intake, 20% tint, 2.5" true duals with flowmaster original 40s Many mods to come |
||
|
"Neil" Secretary Florida Chapter  |
I've been running one for about 2 years. With cnc ported heads, 260 cam, LT headers and tuned with SuperChips I was putting down 327rwhp. Needed the idle increased, which SuperChips did to idle ok. Would run much better with a Diablo custom tune. Good low end torque.
04 Hemi GTX #69 2/4 Drop, DynaTech Headers, Comp 260 Cam, Sharadon SP1 Heads, Motive 4.56, Helwig Anti-Sway Bar, Moe's Bars, Paxton Supercharger, Diablo tuned  |
|||
|
|
"Michael" Truck of the Month July 2006  |
ya, the 260 is supposed to be a good torque cam, it'll get your truck up and moving quick. I heard of people running one with just a superchip but definelty would benefit more with a custom tune from Diablo or SCT.
____________________________________________________ MY RIDE 2004 1500 Hemi RCSB\Inertia Motorsports Spartan Cam\Inertia Motorsports CNC Ported 5.7 Heads\AEM Wideband A/F Gauge\SCT TUNED\Flex-A-Lite Electric Fan\180 Thermostat\Shorty Taylor Wires\NGK 5306 Plugs\aFe Cold Air Intake System\Long Tube Pacesetter Headers\Cat Delete\Dual DMH Electric Cutouts\Magnaflow X Pipe\True Duals with 2 AeroTurbine 3030's dumped\Motive 4.56 Gears with LSD\SharaDon Performance Stage II Transmission with Stage III Valve Body\Edge 3000 Billet Torque Converter\Cal Tracs\McGaughy's 2/4 Drop Click here for pics and couple vid's of my truck! |
|||
|
|
"Ken" Secretary California Chapter |
I have had mine a little over a year now. I have superchips for monitoring fuel trims(I was running a little rich)-because of that I purchased a wideband air/fuel meter. After that,I had the air fuel tweaked with a PSC-001 by some of my local california hemi chapter members(chefred112 and 05whitehemi). It is very strong. In it's current tune,I just ran a 13.44@102.2 a couple of weeks ago on drag radials. I have mid-length headers/stock cats/stock heads. This is mainly a torque cam-it pulls great off the line.
04 Atlantic Blue RC/SB-1500/2wd -4.10's/lsd/17's,Superchips,PSC-001,Ramhammer,Airram scoop,JBA headers,custom y-pipe, Magnaflow muffler(SI/DO)dumped, Comp 260 cam,6.1 springs,6.1 pushrods,180 t-stat,NGK 4306's,Taylor shorty's,Western Chassis 2/4 drop,and a few things not yet installed...... |
|||
|
 |
So would it be a good cam for towing?
2006 Black Mega Cab Current mods: Access tonneau cover, 3rd Strike CAI,Tekonsha PRIMUS Trailer Brake Controller, Sumitt Turbo Muffler, Tow Mirrors, Tranny Temp Gauge in SRT A Pillar Pending Mods: Tuner, Tint Front Windows, Nerf Bars    |
|||
|
 HTC.com Audio Consultant  |
i would say the best cam for towing
 Black 2004 Qc 4X4, Superchips,comp 260 cam,home ported & milled heads,6.1 spring and pushrods, PSC1, Taylor Thundevolt 50, Edelbrock TES headers, true duals with Magnaflow, K&N C.A.I., Innovate LC1, MarkVIII E Fan, 180* t stat,Hellwig RSB, 6 X HID,sport running boards and bed accents,lund rool pan, Kenwood KNX7100 nav., R camera, 80G hard drive, 9" flip down monitor, Phoenix gold Tantrum 600.4 for Diamond Audio 4.5" dash and R.F. 5" R doors, Orion Extreme 500.4 for HCCA 6S comps front door, Precision Power DCX 1500.1 for 2 X 10" RE Audio SE, Oxygen Audio 20 Farad cap, Rammat sound deadner, tons of wires |
|||
|
|
Off-Road Suspension expert  |
It's a great choice. Plenty of torque off idle, but it really wakes up around 3700-3800 rpm at WOT. Hemifever is an excellent SCT tuner in the Raleigh area. Try sending him a PM.
'03 Black SLT QC SWB 4x4 Off-Road-- Rough Country X-Lift -- Deaver progressive leaf springs w/ 4" lift -- Bilstein 5100 shocks (BE5-6528-H5 front / BE5-6249-H5 rear) -- 35 x 12.50 Dick Cepek FCII's on 17 x 9 Centerline Dorsals -- AirAid Intake System w/ AMSOIL synthetic filter -- Comp 260 cam -- Manley springs & retainers -- Stu's Custom Pushrods -- JBA Cat-4ward mids -- Borla cat-back exhaust --Superchips -- Mark VIII e-fan w/ FK60 -- 8.2mm Taylors-- 180 deg t-stat -- AMSOIL -- Hella Black Magics -- bunch of other stuff "An appeaser is one who feeds a crocodile, hoping it will eat him last." - Sir Winston Churchill HTC Titan killer     |
|||
|
| Powered by Eve Community |
 | Please Wait. Your request is being processed... |
|
Copyright HemiTruckClub.com 2009