Visit our Website   Visit Our Sponsor Superchips
HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  4X4 World  Hop To Forums  Lift kits/Suspension mods    Installed my 3" BL
Page 1 2 

Moderators: Freeze
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
"Jason"
Picture of mudchucker
Posted
This is a copy from over at DT that I had going, thought i'd post for some of you that aren't members.

Here is the before pic with the 2" leveling kit.



After 3" body lift




Here is the rubberized undercoating I sprayed on until I get my liners on Tuesday,.. I couldn't stand the silver box side and had to hide it.


I am going to add a 1/4" piece of steel to each side where my leveling kit is to see how much extra it will raise the front.

With it the way it is now, my front is lifted 4.75in with the combined BL and level kits, and seeing how my cv angles aren't really that bad, try to get another 1/4in out of it.


2006 1500 QC TRX4 Offroad edition, factory tow package with 3.92's

My mods are located on or in my truck,.. I have come to the conclusion they work better there than posted on here.

Zeitgeist:Addendum

 
Posts: 1236 | Location: GP, Alberta | Registered: 26 October 2007Reply With QuoteEdit or Delete MessageReport This Post
Vice President
NC Chapter

Truck of the Month
November 2007
Picture of roberx
Posted Hide Post
nice upgrade any down falls yet? how hard was the install?


Irish today and drunk tomorrow!!!
2007 Silver Graphite Metallic ThunderRoad QuadCab Hemi 4x4, Chrome Mopar Package
Flowmaster 50-series dual catback, 3rd Strike CAI, 3rd Strike throttle body spacer, 2.5 topguncustomz leveling kit, AMSOIL, PUTCO Chrome door and tailgate covers, UWS GullWing Series Toolbox
NEXT MOD:
Superchips Tuner 3815, Plasmaglow Fire & Ice 60" Truck Light Bar, Plasmaglow head lights and fog lights.
other rides:
2002 VW Jetta 1.8 turbo(my gas saver)
2008 Jeep Patriot 4 cyl.(wifes gas saver)

http://www.cardomain.com/ride/2741128
My website:
http://roberx.tripod.com/
Myspace:
http://www.myspace.com/07thunderroad_hemi



 
Posts: 3351 | Location: Fort Bragg, NC | Registered: 27 August 2007Reply With QuoteEdit or Delete MessageReport This Post
"Jason"
Picture of mudchucker
Posted Hide Post
No downfalls,..

Only thing is it is much easier if you have an e-fan with no stock shroud.

I love it,.. can't wait till I get my tires tomorrow/Tues,.. I have gotten so many compliments today its not funny,.. too bad I didn't do this sooner,.. But in the past lifting so many trucks,.. I told my wife I would wait a year or 2 before doing any major upgrades. So this is a long awaited project.


2006 1500 QC TRX4 Offroad edition, factory tow package with 3.92's

My mods are located on or in my truck,.. I have come to the conclusion they work better there than posted on here.

Zeitgeist:Addendum

 
Posts: 1236 | Location: GP, Alberta | Registered: 26 October 2007Reply With QuoteEdit or Delete MessageReport This Post
"Phil"
Picture of madcat
Posted Hide Post
nice mod! That think will rock with those wheels/tires! Great Job. thumb2


__________________________________
06'-Ram-Hemi-Pearl Black-Magnaflow-AEM CAI-Diablo CMR Tuned By Mike W. @ tuningsuperstore.com
06'-Magnum R/T-Hemi-Pearl Black-Magnaflow-Diablo Tuned


___________________________


 
Posts: 4666 | Location: Rockwall, TX | Registered: 23 February 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of SFD90
Posted Hide Post
Looks good - its gonna really looks bad ass with some meaty tires thumb2


'06 Silver Quad Cab 5.7L HEMI 4X4

3rd Strike CAI, Air Ram Powerwire & Jet Scoop, Magnaflow 16699 Cat Back,
Fire and Ice Light Bar, Custom Tail Lights, Projector/Halo Headlights, Westin Step Bars, Extang Full Tilt Tonneau Cover, Misc. Chrome Bolt Ons


 
Posts: 347 | Location: Cleveland, Ohio | Registered: 13 December 2007Reply With QuoteEdit or Delete MessageReport This Post
"Jason"

Truck of the Month
May 2008
Picture of UsmcMan96
Posted Hide Post
Looks good.


Current mods:

Exterior: 2003 RC short bed Ram. Chrome 20" Motto wheels, 275/55/20 Bridgestone Duelers, tint, functional SRT-10 Hood, Street Scene bumper cover, de-chromed and painted rear bumper, body matched grill shell, mirrors, door handles, tailgate handle and antenna mount, billet grill and bumper inserts, Bushwhacker street fender flares, polished "Ram" 3rd brake light cover.
Engine: Flowmaster 40 series dual exhaust, 3rd Strike dual filter with throttle body spacer.
Audio: Alpine 9885 with IPod, Infiniti 3.5", 5.25" and 6x9's, two Kenwood DVC 12" subs with three Kenwood amps running it all through Monster Cable wiring. Optima red-top.
Interior: Sueded headliner, color matched A&B pillars, overhead console, and rear light surround.
Proudly serving our country with the Marine Corps for 12 years.


 
Posts: 2779 | Location: Houston, Texas | Registered: 17 July 2007Reply With QuoteEdit or Delete MessageReport This Post
"Jason"
Picture of mudchucker
Posted Hide Post
Thanks guys

Well my tires made it to the drop off depot,.. BUT Eagle Alloy is dragging their ASS with the shipment of my rims. So,.. I am looking at the end of the week for an install time Mad


2006 1500 QC TRX4 Offroad edition, factory tow package with 3.92's

My mods are located on or in my truck,.. I have come to the conclusion they work better there than posted on here.

Zeitgeist:Addendum

 
Posts: 1236 | Location: GP, Alberta | Registered: 26 October 2007Reply With QuoteEdit or Delete MessageReport This Post
"Milo"
Picture of HEMI 07
Posted Hide Post
That looks kick azz beer


2007 Black 4x4 QC Big Horn HEMI 5.7 Bucket Seats


 
Posts: 2043 | Location: West Michigan | Registered: 17 November 2007Reply With QuoteEdit or Delete MessageReport This Post
Off-Road Suspension
Consultant




Picture of Freeze
Posted Hide Post
Nice! thumb2


'03 Black SLT QC SWB 4x4 Off-Road -- 35 x 12.50 Dick Cepek FCII's on 17 x 9 Centerline Dorsals -- AirAid Intake System w/ AMSOIL synthetic filter -- Comp 260 cam -- Manley springs, retainers, & pushrods -- JBA Cat-4ward mids -- Borla cat-back exhaust --Superchips -- Mark VIII e-fan w/ FK60 -- 8.2mm Taylors-- 180 deg t-stat -- AMSOIL -- Torsion bar lift (re-keyed) -- Bilstein 5125 shocks (BE5-6140-T5 front / BE5-6248-H5 rear) -- Hella Black Magics -- bunch of other stuff

Coming soon: Rough Country X-Lift up front, Deaver progressive leaf springs in back, and longer Bilsteins all around.

"An appeaser is one who feeds a crocodile, hoping it will eat him last." - Sir Winston Churchill

HTC Titan killer

 
Posts: 10962 | Location: Virginia Beach, VA | Registered: 21 June 2004Reply With QuoteEdit or Delete MessageReport This Post
Picture of japeezie
Posted Hide Post
Nice Job! Looks Good. Will the fender liners cover the gaps?
 
Posts: 31 | Location: bay area | Registered: 29 August 2007Reply With QuoteEdit or Delete MessageReport This Post
"Jason"
Picture of mudchucker
Posted Hide Post
quote:
Originally posted by japeezie:
Nice Job! Looks Good. Will the fender liners cover the gaps?


Pretty sure they should,.. if not oh well,.. I have some rubber I can turn into gap guards. I will check this weekend,.. have a friend who has some liners.


2006 1500 QC TRX4 Offroad edition, factory tow package with 3.92's

My mods are located on or in my truck,.. I have come to the conclusion they work better there than posted on here.

Zeitgeist:Addendum

 
Posts: 1236 | Location: GP, Alberta | Registered: 26 October 2007Reply With QuoteEdit or Delete MessageReport This Post
President,
Michigan Chapter

Truck of the Month
October 2008

Picture of dline
Posted Hide Post
can't wait to see it with the tires!


____________________________
SEMichigan Built
07 QCSB 4x4: truetrac, 4.56's & 04 RCSB 4x4: 4.56's, JM heads, APS TC, RAMHAMMER & 268 cam.


1/4 : 12.997 @ 104.93

 
Posts: 1921 | Location: SE Michigan | Registered: 11 July 2005Reply With QuoteEdit or Delete MessageReport This Post
"Jason"
Picture of mudchucker
Posted Hide Post
Me either,.. but not sure what is up Eagle Alloys' ass,.. they are 1 week behind with my shipment.


2006 1500 QC TRX4 Offroad edition, factory tow package with 3.92's

My mods are located on or in my truck,.. I have come to the conclusion they work better there than posted on here.

Zeitgeist:Addendum

 
Posts: 1236 | Location: GP, Alberta | Registered: 26 October 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of noodelz
Posted Hide Post
So what are we talking about for install? I am thinking about doing one. What all in all has to be done?


HTC Titan Killer

2003 Graphite Grey Q-Cab SLT 4X4
Superchips 3715, True Duals, No Cats, Airraid TB spacer, Taylor Shorties,
TransGo Shift Kit,Jet Scoop,Pacesetter LT's, powerwire, 3rd Strike CAI
Soon to be installed: COMP 260 Cam, 6.1 springs and Manley rods.
And Hopefully NITROUS!


THROUGH THESE EYES I'VE LOOKED THE DEVIL IN THE FACE AND HE SAID TO ME "SEE YEA SOON"


 
Posts: 279 | Location: Morinville, Alberta, Canada | Registered: 22 March 2008Reply With QuoteEdit or Delete MessageReport This Post
"Jason"
Picture of mudchucker
Posted Hide Post
quote:
Originally posted by noodelz:
So what are we talking about for install? I am thinking about doing one. What all in all has to be done?


Here is the link for your truck, of the install instructions. It is for both 2wd and 4wd

Here


2006 1500 QC TRX4 Offroad edition, factory tow package with 3.92's

My mods are located on or in my truck,.. I have come to the conclusion they work better there than posted on here.

Zeitgeist:Addendum

 
Posts: 1236 | Location: GP, Alberta | Registered: 26 October 2007Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community Page 1 2  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  4X4 World  Hop To Forums  Lift kits/Suspension mods    Installed my 3" BL

Copyright HemiTruckClub.com 2008