What drag radials to choose from - Topic Powered by Eve Community

and

2008 Dodge Durango 4x4 SLT HEMI and 2007 Dodge Ram 1500 4x4 SLT Quad Cab HEMI
www.lubedealer.com/99705/

Posts: 6572 | Location: North Pole, Alaska | Registered: 18 October 2008

Ignored post by rdsetgo posted

JTShemi

Posted

just wonderin if anyones tried or knows of anyone that has these 325 radials on stock 17s

04 single cab Short Bed, Inertia Motorsports heads 5.7 heads, 214/218 FRI cam, SCT, hedman longtubes, Magnaflow DI/DO, Crown-Vic E-fan, 180 stat. AEM Wideband, DJM2/4 drop

Posts: 41 | Location: Rockwall/Denton, Texas | Registered: 20 February 2007

Ignored post by JTShemi posted

madcat

"Phil"

Posted

quote:
MH325/45/17s

i dont know if an almost 13" wide tire will sit well within the 7.5-8" rim width of those 17s? those 275/50's are still almost 11" wide!

325/45/17
Width: 12.8"
Height: 28.52"

275/50/17
Width: 10.83"
Heightr: 27.83"

____________________________________________________________________________
06'-Ram-Hemi-Pearl Black-Magnaflow-AEM CAI-Diablo CMR Tuned By Mike W. @ tuningsuperstore.com
06'-Magnum R/T-Hemi-Pearl Black-Magnaflow-Diablo Tuned

Ram in Action

Only 2 defining forces have ever offered to die for you.... Jesus Christ and the American Soldier.
One died for your soul, the other for your freedom.

Posts: 6737 | Location: Rockwall, TX | Registered: 23 February 2007

Ignored post by madcat posted

President,
Michigan Chapter

Truck of the Month
October 2008

Posted

I'd try it, this thread shows a comparison of them to a 295 45 17 mt drag radial, that are extinct now also.

http://forum.nadodge.com/viewtopic.php?f=7&t=531

____________________________
RCSB 4x4: 6.1 based 418 C.I. 4.56's, 6.1 heads, APS TC, BFI & 273 cam.

1/4 : 12.52 @ 108

Posts: 2251 | Location: SE Michigan | Registered: 11 July 2005

Ignored post by dline posted

JTShemi

Posted

yea i was reading your thread and saw some people fitting the325s on stock aluiminum 17s but wouldnt that make the tread withs bow out so only the center touches, or would that matter since im gona only be running like 18 psi

04 single cab Short Bed, Inertia Motorsports heads 5.7 heads, 214/218 FRI cam, SCT, hedman longtubes, Magnaflow DI/DO, Crown-Vic E-fan, 180 stat. AEM Wideband, DJM2/4 drop

Posts: 41 | Location: Rockwall/Denton, Texas | Registered: 20 February 2007

Ignored post by JTShemi posted

arocketman

"Bill"

President
FL Chapter

Florida Chapter
Truck of the Year 2008

Posted

While we're at it.......where do we find wider 17' rims???

2005 1500 QC Thunder Road
Slightly Tweaked

Posts: 2526 | Location: Space Coast, FL | Registered: 04 August 2007

Ignored post by arocketman posted

President,
Michigan Chapter

Truck of the Month
October 2008

Posted

moesperformance.com

____________________________
RCSB 4x4: 6.1 based 418 C.I. 4.56's, 6.1 heads, APS TC, BFI & 273 cam.

1/4 : 12.52 @ 108

Posts: 2251 | Location: SE Michigan | Registered: 11 July 2005

Ignored post by dline posted

arocketman

"Bill"

President
FL Chapter

Florida Chapter
Truck of the Year 2008

Posted

moesperformance.com

Nitto 18" Drag Radials 305/45-18; MB 72 18"x9" Wheels
$773.00
Always Free Shipping

2005 1500 QC Thunder Road
Slightly Tweaked

Posts: 2526 | Location: Space Coast, FL | Registered: 04 August 2007

Ignored post by arocketman posted

President,
Michigan Chapter

Truck of the Month
October 2008

Posted

the 295 45 17 mt drag radials are available also

____________________________
RCSB 4x4: 6.1 based 418 C.I. 4.56's, 6.1 heads, APS TC, BFI & 273 cam.

1/4 : 12.52 @ 108

Posts: 2251 | Location: SE Michigan | Registered: 11 July 2005

Ignored post by dline posted

arocketman

"Bill"

President
FL Chapter

Florida Chapter
Truck of the Year 2008

Posted

2005 1500 QC Thunder Road
Slightly Tweaked

Posts: 2526 | Location: Space Coast, FL | Registered: 04 August 2007

Ignored post by arocketman posted

Starchief_59

Posted

I used to run the M&H drag radials which were 275/50 and fit easily on a stock Dodge Ram rim. They hooked great also

I got them from Duane although they were a little cheaper off the M&H website. Duane takes good care of us

1959 Buick Electra 4 Door Sedan
1959 Pontiac Star Chief 4 Door Hard Top
1976 W200 Dodge Power Wagon 383/ 727 4x4
1986 W100 Dodge Power Ram 318/ 4 speed 4x4
2007 Dodge Ram Single Cab Long Bed - almost no options except posi and HEMI!
www.Pontiac-59.com

Posts: 1993 | Location: San Marcos, Texas | Registered: 05 September 2007

Ignored post by Starchief_59 posted

jim guy

Former Hemi
truck owner

Posted

I have the m&h's also, they do hook up good. I may sell mine though, they are 28" tall, and I dont have gears in my truck yet. I need a shorter tire.

08 reg. cab swb k&n 77 series intake,sc3815,bbk headers,powertrax locker,6.1 cam,lake wood trac.bars,belltech springs

Posts: 241 | Location: Morrilton, Arkansas | Registered: 23 April 2008

Ignored post by jim guy posted

President,
Michigan Chapter

Truck of the Month
October 2008

Posted

http://nadodge.com/showthread.php?t=53

____________________________
RCSB 4x4: 6.1 based 418 C.I. 4.56's, 6.1 heads, APS TC, BFI & 273 cam.

1/4 : 12.52 @ 108

Posts: 2251 | Location: SE Michigan | Registered: 11 July 2005

Ignored post by dline posted

Starchief_59

Posted

Shorter tire? I may be interested in yours if you want to sell them.

A shorter tire would be better gearingwise but it would look goofy as hell

Posts: 1993 | Location: San Marcos, Texas | Registered: 05 September 2007

Ignored post by Starchief_59 posted