Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
Audio Consultant |
I've been collecting scrap cooper that i find in excavations at work and i was able to generate enough money for a set of Edelbrock TES ceramic coated ($508.79) i know the Edelbrock gaskets are very good so i wil be using them my question is should i use stage 8 bolts or are the ones that come with that tem good enough,
Black 2004 Qc 4X4, Superchips,comp 260 cam,6.1 springs and pushrods,Taylor Thundevolt 50, Edelbrock TES headers, 3.5" Moroso Spiral Flow/ , K&N C.A.I., Innovate LC1, MarkVIII E Fan, Hellwig RSB, 4 X HID,Daytona running boards and bed accents,lund rool pan, Kenwood KNX7100 nav., R camera, 80G hard drive, 9" flip down monitor, Phoenix gold Tantrum 600.4 for Diamond Audio 4.5" dash and R.F. 5" R doors, Elemental Designs 9.4 for HCCA 6S comps front door, Precision Power DCX 1500.1 for 2 X 10" RE Audio SE, Oxygen Audio 20 Farad cap, Rammat sound deadner, tons of wires     |
||
|
|
"George" Member, Board of Directors President New York Chapter  |
The Stage 8 bolts and locks are nice.
I didn't use them on mine, due to the fact that I forgot to order them....  So...in went the hardware supplied with the headers. No problems, no leaks. Just make sure that you run it at idle for 15-20 minutes and then retighten them from the center out. On each side I only had 2 or 3 that even moved a little on the re-torque. You'll like the TES setup.  2005 Hemi Off Road 4X4 QC, Mopar CAI,NGK 4306 plugs, SRT-10 A pillar,AutoMeter Quad gauge overhead console,DynoTune N2O Control Panel,AutoMeter fuel and nitrous gauges,Gibson Extreme Cat Back System,Edelbrock TES Ceramic Headers, QTP 3" electric cutout, Super Chips tuned 3.92 gears w/Anti-Spin, Lakewood traction bars, Billet "HEMI" radiator insert and Zex Nitrous Oxide See my truck at http://www.cardomain.com/ride/2314060"This ain't your Daddy's Quad Cab" THAT THING GOTTA HEMI???? YOUR ABOUT TO FIND OUT... D500 the ORIGINAL HEMI PERFORMANCE OPTION FROM DODGE (1956)           .jpg) |
|||
|
|
Audio Consultant |
Thanks i went ahead and order the stage 8 bolt's from 3rd Strike
Black 2004 Qc 4X4, Superchips,comp 260 cam,6.1 springs and pushrods,Taylor Thundevolt 50, Edelbrock TES headers, 3.5" Moroso Spiral Flow/ , K&N C.A.I., Innovate LC1, MarkVIII E Fan, Hellwig RSB, 4 X HID,Daytona running boards and bed accents,lund rool pan, Kenwood KNX7100 nav., R camera, 80G hard drive, 9" flip down monitor, Phoenix gold Tantrum 600.4 for Diamond Audio 4.5" dash and R.F. 5" R doors, Elemental Designs 9.4 for HCCA 6S comps front door, Precision Power DCX 1500.1 for 2 X 10" RE Audio SE, Oxygen Audio 20 Farad cap, Rammat sound deadner, tons of wires |
|||
|
| Previous Topic | Next Topic | powered by eve community |
 | Please Wait. Your request is being processed... |
|
|||
| Site | HTC.com Forum | ||
| Servlet | eve2da022 | ||
| Version | 1.2.22 build 9062 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "Merchant" | ||
| Wordlet Set | "Default Wordlet Set" | ||
|
Copyright HemiTruckClub.com 2008