Visit our Website   Visit Our Sponsor Superchips
HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  HEMI performance  Hop To Forums  Headers    Exhaust Theory & Header Design

Moderators: MrHemi
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Off-Road Suspension
Consultant




Picture of Freeze
Posted
Great article from Burns Stainless.


'03 Black SLT QC SWB 4x4 Off-Road -- 35 x 12.50 Dick Cepek FCII's on 17 x 9 Centerline Dorsals -- AirAid Intake System w/ AMSOIL synthetic filter -- Comp 260 cam -- Manley springs, retainers, & pushrods -- JBA Cat-4ward mids -- Borla cat-back exhaust --Superchips -- Mark VIII e-fan w/ FK60 -- 8.2mm Taylors-- 180 deg t-stat -- AMSOIL -- Torsion bar lift (re-keyed) -- Bilstein 5125 shocks (BE5-6140-T5 front / BE5-6248-H5 rear) -- Hella Black Magics -- bunch of other stuff

Coming soon: Rough Country X-Lift up front, Deaver progressive leaf springs in back, and longer Bilsteins all around.

"An appeaser is one who feeds a crocodile, hoping it will eat him last." - Sir Winston Churchill

HTC Titan killer

 
Posts: 10962 | Location: Virginia Beach, VA | Registered: 21 June 2004Reply With QuoteEdit or Delete MessageReport This Post
"Jason"
Picture of HoustonHemi
Posted Hide Post
That is a very good article. ALot I didndt know.


Jason
2007 QC 1500 Lonestar Bright White
Debadged except hemi & dodge badges
Motive 4.56 Gears/ Jet Stream Air Scoop/ 3rd Strike Intake polished aluminium with amsoil filter and pre filter/ Aero Turbine 3030XL Dumped 18 inches behind cab


 
Posts: 772 | Location: Houston, TX | Registered: 21 August 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
ive been preaching that on here for a while, lol a good header will pull a vacuum on exhaust gases from the combustion chamber, if you have too small of a tailpipe setup all of your power will be low range, but how often do you need power on the lower rpm? 3" for me gives me a good jerking powerband from about 3000 to 6300 rpm as far as i rev.



JOHNNYWITHAHEMI
SRT-10 rear axel swap
D-60 LSD,4.10 gears srt-10 dual piston vented rear brakes
SHARADON STAGE III VALVEBODY, Lincoln 18" E-Fan,TransgoHDReprogram SHift Kit with resistor, Superchips performance tune, LS2 4" intake with heat wrap, Hedman LTs 1 5/8 primaries, 3"ORY, Cats Removed, 3" Dynomax Bullet, mcgaughys 2/4 see sig lol Custom painted bumpers, shaved and painted grille shell, rumble bee grille inserts, Debadged,Tinted windows, 5% front windshield sun brow, MB gunner 5s, Road hugger 275/55R20s, Taylor shorties, Bosch platinum plugs, 2 inch drop in back, overloads removed, Pioneer 6 disc w/remote, 600w amp with 2 12inch subs
 
Posts: 485 | Location: Austin, Texas | Registered: 05 October 2007Reply With QuoteEdit or Delete MessageReport This Post
"Jason"
Picture of HoustonHemi
Posted Hide Post
Never knew about the wave thing that was the vacum. Pretty cool.


Jason
2007 QC 1500 Lonestar Bright White
Debadged except hemi & dodge badges
Motive 4.56 Gears/ Jet Stream Air Scoop/ 3rd Strike Intake polished aluminium with amsoil filter and pre filter/ Aero Turbine 3030XL Dumped 18 inches behind cab


 
Posts: 772 | Location: Houston, TX | Registered: 21 August 2007Reply With QuoteEdit or Delete MessageReport This Post
"Phil"
Picture of madcat
Posted Hide Post
thumb2


__________________________________
06'-Ram-Hemi-Pearl Black-Magnaflow-AEM CAI-Diablo CMR Tuned By Mike W. @ tuningsuperstore.com
06'-Magnum R/T-Hemi-Pearl Black-Magnaflow-Diablo Tuned


___________________________


 
Posts: 4666 | Location: Rockwall, TX | Registered: 23 February 2007Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  HEMI performance  Hop To Forums  Headers    Exhaust Theory & Header Design

Copyright HemiTruckClub.com 2008