Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
 |
I have an 05 Dodge ram and was curious on good headers for my truck im on a budget, and i want to get long tubes. Well 03-04 headers work on my 05? Anyone using the obx headers? Dont really care for ceramic. I dont want to run a y-pipe into stock exhaust. Any help would be appreciated.
 2005 Dodge Ram Rumble Bee Second Swarm 2wd # 3522 |
||
|
"Jordan" |
03-04 will work on your '05. Pacesetter makes a great set that a lot of guys use, and uncoated they're fairly cheap.
_____________ 2004 QC 2WD Comp 268 cam, 6.1L valvesprings/pushrods, Pacesetter Jet-Hot coated LT's/ORY, K&N intake, Taylor shorties, Borla XR1 dumped, 3.92/posi rear, SCT tune by Hemifever, short belt for the track, 15% tint, 2" drop shackles, debadged except fenders |
|||
|
"Michael" Truck of the Month July 2006  |
yep they would work on your truck. and I have seen uncoated longtube headers run for $300 before. I do suggest you at least get rid of the restrictive stock y pipe and buy one or get one made.
____________________________________________________ MY RIDE 2004 1500 Hemi RCSB\Inertia Motorsports Spartan Cam\Inertia Motorsports CNC Ported 5.7 Heads\AEM Wideband A/F Gauge\SCT TUNED\Flex-A-Lite Electric Fan\180 Thermostat\Shorty Taylor Wires\NGK 5306 Plugs\aFe Cold Air Intake System\Long Tube Pacesetter Headers\Cat Delete\Dual DMH Electric Cutouts\Magnaflow X Pipe\True Duals with 2 AeroTurbine 3030's dumped\Motive 4.56 Gears with LSD\SharaDon Performance Stage II Transmission with Stage III Valve Body\Edge 3000 Billet Torque Converter\Cal Tracs\McGaughy's 2/4 Drop Click here for pics and couple vid's of my truck! |
|||
|
|
|
Well i was looking on moes and was looking at the pacesetters and i was planning on getting them w/ the offroad y-pipe. I was curious if i run this setup w/o convertors well i have any mechanical issues i know it well throw a code. Is their away to prevent it from thowing a code?
 2005 Dodge Ram Rumble Bee Second Swarm 2wd # 3522 |
|||
|
"Jason" |
With high flow cats it throws a cat eneficency code. You then use anti spark plug foulers and steel wool if needed to trick the cat monitor to think the cat is working the same as the stock ones. I don't know if you can do the same with no cats. 2007 QC 1500 Lonestar Bright White Debadged except hemi & dodge badges Motive 4.56 Gears/ Jet Stream Air Scoop/ 3rd Strike Intake polished aluminium with amsoil filter and pre filter/ Hedman Headers/ Magnaflow x-pipe/ Two Aero Turbine AT2525s dumped under bed |
|||
|
|
|
Oh well if i have to i might just run a single cat after the y-pipe, but thinks for ur inputs its greatly appreciated and if it does throw a code nothing, but a little piece o duct tape to fix that. LOL
2005 Dodge Ram Rumble Bee Second Swarm 2wd # 3522 |
|||
|
 |
with an 05 you have 2 cats now and 4 O2's
If you are going to run high flow cats to help with the O2s you will need to of them unless you plan to really extend the wires on them and install them both behind a single cat. 2005 Ram Daytona #1445 / GoManGo! / Mopar CAI / Dip X D04 22's with Kumho Stx 305/45/22s / Auburn limited slip / 2-4 Drop/ Edelbrock mid-length headers / Custom True Dual Exhaust / Superchips Flashpaq / Pop&Lock Tailgate Lock / EVS II with Sentry key and remote start / Alpine, PG, and Kicker custom stereo / SilverStar headlights and foglights / Optima Yellow Top / AEM Wideband in SRT-10 Pillar / Retrax Bed Cover / Spray in Bed Liner |
|||
|
"Johnny"  |
If you plan on runnin no cats just leave the o2 sensors connected but tuck em up out of the way. You will still throw a code for downstream sensor lean but it really doesn't mean anything, just that the O2's isn't reading anything but fresh air and it won't hurt the motor. Warning though your truck will be obnoxiously loud and not sound good at all.....at least mine didn't. I put magnaflows on and just used one spark plug non-fouler on each and haven't had any codes since and the truck sounds much nicer now.
2004 RAM 1500 SLT R/C S/B Pacesetter LT's w/ Hi-flow cats and 3" Y, Dynomax Ultraflow, aFe highbreather, AirAid M.I.T. and Taylor Thundervolt 8.2 long wires SCT TUNED by Hemifever    |
|||
|
|
|
So can i run a single high flow cat after the y-pipe? Or well it sound like shit?
2005 Dodge Ram Rumble Bee Second Swarm 2wd # 3522 |
|||
|
|
"Johnny" |
You have an '05 why would ya run a single cat when the truck has 2?? You could do it but don't be surprised when ya throw codes.
2004 RAM 1500 SLT R/C S/B Pacesetter LT's w/ Hi-flow cats and 3" Y, Dynomax Ultraflow, aFe highbreather, AirAid M.I.T. and Taylor Thundervolt 8.2 long wires SCT TUNED by Hemifever |
|||
|
|
|
If you want to run cats you either need to get a header setup that comes with them or add them on to one.
If you get the Pacesetters get their Y pipe with it and two high flow cats. cut out sections of the Y pipe to install the cats right after the headers. The read of the Y pipe should connect to your current catback system unless you are running true duals. 2005 Ram Daytona #1445 / GoManGo! / Mopar CAI / Dip X D04 22's with Kumho Stx 305/45/22s / Auburn limited slip / 2-4 Drop/ Edelbrock mid-length headers / Custom True Dual Exhaust / Superchips Flashpaq / Pop&Lock Tailgate Lock / EVS II with Sentry key and remote start / Alpine, PG, and Kicker custom stereo / SilverStar headlights and foglights / Optima Yellow Top / AEM Wideband in SRT-10 Pillar / Retrax Bed Cover / Spray in Bed Liner |
|||
|
|
|
Yeah i understand i thought i seen some where where i guy ran a single cat after the y-pipe on a dodge ram, but thanks now i know what ill have to too buy. Thanks
2005 Dodge Ram Rumble Bee Second Swarm 2wd # 3522 |
|||
|
| Powered by Eve Community |
 | Please Wait. Your request is being processed... |
|
Copyright HemiTruckClub.com 2009