Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
|
"Chris" Truck of the Month April 2007  |
After installing my headers I got the p0052 code. its a bank 2/1 problem. is bank 2 the driver side? i replaced that o2 sensor in front of the cat already but that did not fix the code. and for some reason i cant clear it with my superchip or by resetting the pcm, the light never goes away. maybe i am doing something wrong there.
any help is really appreciated, i am starting to lose my mind. 2005 Black Hemi Reg Cab 4x4 |
||
|
"Neil" |
Bank 2 is passenger side.
04 Hemi GTX #69 2/4 Drop, SC, DynaTech Headers, Comp 260 Cam, Sharadon SP1 Heads, Motive 4.56, Helwig Anti-Sway Bar, Moe's Bars  |
|||
|
|
"Chris" Truck of the Month April 2007 |
Thanks Neil.
2005 Black Hemi Reg Cab 4x4 |
|||
|
|
"George" Member, Board of Directors President New York Chapter  |
Chris make sure that you didn't damage a connector or pin on the O2 sensor harness.
Just a thought...  2005 Hemi Off Road 4X4 QC, Mopar CAI,NGK 4306 plugs, SRT-10 A pillar,AutoMeter Quad gauge overhead console,DynoTune N2O Control Panel,AutoMeter fuel and nitrous gauges,Gibson Extreme Cat Back System,Edelbrock TES Ceramic Headers, QTP 3" electric cutout, Super Chips tuned 3.92 gears w/Anti-Spin, Lakewood traction bars, Billet "HEMI" radiator insert and Zex Nitrous Oxide See my truck at http://www.cardomain.com/ride/2314060"This ain't your Daddy's Quad Cab" THAT THING GOTTA HEMI???? YOUR ABOUT TO FIND OUT... D500 the ORIGINAL HEMI PERFORMANCE OPTION FROM DODGE (1956)               |
|||
|
|
"Chris" Truck of the Month April 2007 |
replaced my passenger side o2 sensor with the new one, code is still there. tried clearing it with the SC and resetting pcm to no avail. does anyone know if there is a difference between the passenger and driver side o2 sensors other than the plastic connecting clip?
 2005 Black Hemi Reg Cab 4x4 |
|||
|
 |
A quick search on the internet says your passenger side upstream (pre-cat) O2 sensor heater circuit voltage is to high. Swap the downstream (post-cat) sensor. I had the same problem on my '03 (P0132). Duane has them for about $50.00.
http://www.aa1car.com/trouble-codes/codes_99.htm Mods...what mods??   |
|||
|
|
"Neil" |
If it is high voltage then it is probably an open circuit. A connector is not snapped in all the way or a wire is cut. Check these closely. Did you have to use extensions to connect the sensors after installing the headers? If so check them.
04 Hemi GTX #69 2/4 Drop, SC, DynaTech Headers, Comp 260 Cam, Sharadon SP1 Heads, Motive 4.56, Helwig Anti-Sway Bar, Moe's Bars |
|||
|
|
"Chris" Truck of the Month April 2007 |
ok got rid of the p0052, now i have a p0058, its a high voltage code. it probably has to do with the extensions, already found a wire that wasnt connected properly, going to double check again. thanks guys for the help.
 2005 Black Hemi Reg Cab 4x4 |
|||
|
|
"Chris" Truck of the Month April 2007 |
As of today, friday may 16th, i am code free.
 thanks again for the tips guys. 2005 Black Hemi Reg Cab 4x4 |
|||
|
 |
FAhemiST what set of headers did you use?
HTC Titan Killer Club 2006 WHITE LARAMIE 1500 QC/SB 2WD, 20" CROME WHEELS,General Grabber UHP 295/50/20 SRT- 10 HOOD, true duals with flowmaster 40s, SCT tuned by "hemifever", LINE-X,REAR SEAT DVD,limited slip, 3.92 rear, afe magnum force intake,gaylord bed cover, custom x-pipe, royal purple 5w-20, Innovative wideband A/F,SRT a- piller, air ram jet stream scoop, stage 8 locking bolts, QTP Dual 2.5" Electric Exhaust Valve & SS Cutouts, Dynatech longtube system, sidewinder cam, 6.1 springs/ pushrods,    |
|||
|
|
"Chris" Truck of the Month April 2007 |
went with the jet hot pacesetter LTs.
2005 Black Hemi Reg Cab 4x4 |
|||
|
|
|
So it was loose connectors?
Mods...what mods?? |
|||
|
|
"Chris" Truck of the Month April 2007 |
yep, one if my crimps in my extension wasnt so crimped.
2005 Black Hemi Reg Cab 4x4 |
|||
|
| Previous Topic | Next Topic | powered by eve community |
 | Please Wait. Your request is being processed... |
|
|||
| Site | HTC.com Forum | ||
| Servlet | eve2da022 | ||
| Version | 1.2.22 build 9062 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "Merchant" | ||
| Wordlet Set | "Default Wordlet Set" | ||
|
Copyright HemiTruckClub.com 2008