Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
|
Truck of the Month August 2008  |
I need some help asap. Does anyone know the original rotor size for the front and rear.
I bought new drilled and slotted rotors and MAN they look huge. the two new rotors sizes measure (across): 1.) 13 3/4" 2.) 13 1/4" give or take an 1/8" only had a sewing measuring tape on hand. And yes smart a$$$ I sew. SCOTT 353 HP / 343.1 TQ STREET READY, Best 1/4= 14.0 @96.1 MPH 2.0 60 foot. With the perfect rection of .000 time          |
||
|
 |
hey Scott, didn't actually measure yet...but according to Napa's site..it's 13.23" across
http://www.napaonline.com/MasterPages/NOLMaster.aspx?Pa...Left+Front+-+Hi-Perf Stu's Spartan cam-Stu's Big valve heads-4.10 gears-Mark VIII efan-pacesetter LT's-shift kit- RamHammer CAI-true dual exhaust-Magnaflow dumped-dual DMH e-cutout- SC Flashpaq-PSC1 tuner-180 t-stat 60ft - 1.832, 1/8 - 8.39, 1/4 - 13.356@99.12    |
|||
|
|
|
rears...13.86"...this can't be right...
http://www.napaonline.com/MasterPages/NOLMaster.aspx?Pa...+Left+Rear+-+Hi-Perf Stu's Spartan cam-Stu's Big valve heads-4.10 gears-Mark VIII efan-pacesetter LT's-shift kit- RamHammer CAI-true dual exhaust-Magnaflow dumped-dual DMH e-cutout- SC Flashpaq-PSC1 tuner-180 t-stat 60ft - 1.832, 1/8 - 8.39, 1/4 - 13.356@99.12 |
|||
|
|
|
well..it could be right...you didn't tell us which was front or back...
Stu's Spartan cam-Stu's Big valve heads-4.10 gears-Mark VIII efan-pacesetter LT's-shift kit- RamHammer CAI-true dual exhaust-Magnaflow dumped-dual DMH e-cutout- SC Flashpaq-PSC1 tuner-180 t-stat 60ft - 1.832, 1/8 - 8.39, 1/4 - 13.356@99.12 |
|||
|
|
Truck of the Month August 2008 |
the front are the the smaller of the two.
If by Napa specs, my rotors are right on the nose. Front measured: 13.22 OD with 1.11 thickness Rear measured: 13.86 OD with 0.86 thickness Thanks Fred, this makes me feel better, owe you one bro. SCOTT 353 HP / 343.1 TQ STREET READY, Best 1/4= 14.0 @96.1 MPH 2.0 60 foot. With the perfect rection of .000 time |
|||
|
Filter and Lubrication Consultant |
I got it listed as 13.4 front for 2002-2007 Dodge Ram 1500 and 13.9 for the rear.
____________________________________________________ 2003 Dodge Ram 1500 QC SB 5.7L Hemi Express Limited Edition Performance Mods: Bomz Air Intake w/AMSOIL EAAU3590 Air Filter, 295/50 General Grabber UHP Tires, AMSOIL'd EVERYTHING!, Jet Stream, IAT mod, Superchip, FlowMaster SUV SI/SO, Thundervolt Full Length Wires, NGK Iridiums, AMSOIL By-Pass Kit, Power Slot Rotors w/EBC Green Pads, TCM wire pulled, Bilstein Shocks, APS Torque Converter 2500 Stall, Transgo Shift Kit, 195 T-Stat, Helwig Rear Anti Swaybar, Moe's Traction Bars w/Shims, Ground Force 2" Drop Shackles, 6.1 Cam w/Manley Springs, 6.1 Rods & Titanium Retainers, Viper Fan w/FK60 controller, Pacesetter Long Tubes & Y Pipe, Flowtech Exhaust Cutout, ATI 5% UD Harmonic Balancer, 4.10 Sierra Gears, M&H Slicks Best 60ft 1.973 14.172@93.99MPH 345HP/346Torque Future Mods: Custom Grind Cam and Heads AMSOIL Dealer - www.PureSyn.net 877-778-7379, contact me for more info on wholesale or a free catalog. |
|||
|
|
Filter and Lubrication Consultant |
I think if your off a little here or there is okay as long as the calipers line up right with the pads.
http://www.autopartswarehouse.com/mmp/dodge~ram~brake_rotor~parts.html ____________________________________________________ 2003 Dodge Ram 1500 QC SB 5.7L Hemi Express Limited Edition Performance Mods: Bomz Air Intake w/AMSOIL EAAU3590 Air Filter, 295/50 General Grabber UHP Tires, AMSOIL'd EVERYTHING!, Jet Stream, IAT mod, Superchip, FlowMaster SUV SI/SO, Thundervolt Full Length Wires, NGK Iridiums, AMSOIL By-Pass Kit, Power Slot Rotors w/EBC Green Pads, TCM wire pulled, Bilstein Shocks, APS Torque Converter 2500 Stall, Transgo Shift Kit, 195 T-Stat, Helwig Rear Anti Swaybar, Moe's Traction Bars w/Shims, Ground Force 2" Drop Shackles, 6.1 Cam w/Manley Springs, 6.1 Rods & Titanium Retainers, Viper Fan w/FK60 controller, Pacesetter Long Tubes & Y Pipe, Flowtech Exhaust Cutout, ATI 5% UD Harmonic Balancer, 4.10 Sierra Gears, M&H Slicks Best 60ft 1.973 14.172@93.99MPH 345HP/346Torque Future Mods: Custom Grind Cam and Heads AMSOIL Dealer - www.PureSyn.net 877-778-7379, contact me for more info on wholesale or a free catalog. |
|||
|
|
Truck of the Month August 2008 |
You would think the fronts would be bigger.
 SCOTT 353 HP / 343.1 TQ STREET READY, Best 1/4= 14.0 @96.1 MPH 2.0 60 foot. With the perfect rection of .000 time |
|||
|
|
Truck of the Month August 2008 |
I used a 18 inch caliper to gauge the rotors. Man I'm icthin to install them.
Here the fronts SCOTT 353 HP / 343.1 TQ STREET READY, Best 1/4= 14.0 @96.1 MPH 2.0 60 foot. With the perfect rection of .000 time  |
|||
|
|
Truck of the Month August 2008 |
ANd rears
SCOTT 353 HP / 343.1 TQ STREET READY, Best 1/4= 14.0 @96.1 MPH 2.0 60 foot. With the perfect rection of .000 time  |
|||
|
|
Filter and Lubrication Consultant |
The rears are bigger to make room for our elaborate e-brake system. ____________________________________________________ 2003 Dodge Ram 1500 QC SB 5.7L Hemi Express Limited Edition Performance Mods: Bomz Air Intake w/AMSOIL EAAU3590 Air Filter, 295/50 General Grabber UHP Tires, AMSOIL'd EVERYTHING!, Jet Stream, IAT mod, Superchip, FlowMaster SUV SI/SO, Thundervolt Full Length Wires, NGK Iridiums, AMSOIL By-Pass Kit, Power Slot Rotors w/EBC Green Pads, TCM wire pulled, Bilstein Shocks, APS Torque Converter 2500 Stall, Transgo Shift Kit, 195 T-Stat, Helwig Rear Anti Swaybar, Moe's Traction Bars w/Shims, Ground Force 2" Drop Shackles, 6.1 Cam w/Manley Springs, 6.1 Rods & Titanium Retainers, Viper Fan w/FK60 controller, Pacesetter Long Tubes & Y Pipe, Flowtech Exhaust Cutout, ATI 5% UD Harmonic Balancer, 4.10 Sierra Gears, M&H Slicks Best 60ft 1.973 14.172@93.99MPH 345HP/346Torque Future Mods: Custom Grind Cam and Heads AMSOIL Dealer - www.PureSyn.net 877-778-7379, contact me for more info on wholesale or a free catalog. |
|||
|
|
Truck of the Month August 2008 |
 Now it get it.SCOTT 353 HP / 343.1 TQ STREET READY, Best 1/4= 14.0 @96.1 MPH 2.0 60 foot. With the perfect rection of .000 time |
|||
|
|
"Dave" VP Kentucky Chapter Truck of the Month April 2006  |
Nice rotors!
 2005 RCSB 1500 SLT 5.7 Hemi Ram - 4 inch ram air from fog light hole - Amsoil drop-in filter - AirAid MIT - Taylor shorty wires Flowmaster 50HD SI/SO 3” - General Grabber UHP 295/50 20 tires - Superchips Flashpaq 3815 - Race weight 4795 lbs Best 1/8 mile 9.28 @ Bowling Green - Best 1/4 mile 14.51 @ Bowling Green           |
|||
|
|
"Jay" President, South Carolina Chapter HTC.com Engine Specialist  |
2003, Std. SWB, SLT, 20", 4:56 gear, AFE CAI, Superchip, 6.1 cam, 6.1 heads, Manley springs, retainers, pushrods, Edelbrock Hedders, 195 T-Stat, 8.2 Taylor, AEM, Power Wire, ARC-1,Amsoil Everything, and more. Veni Vidi Vici HTC.com Titan Killer Club       |
|||
|
| Previous Topic | Next Topic | powered by eve community |
 | Please Wait. Your request is being processed... |
|
|||
| Site | HTC.com Forum | ||
| Servlet | eve2da022 | ||
| Version | 1.2.22 build 9062 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "Merchant" | ||
| Wordlet Set | "Default Wordlet Set" | ||
|
Copyright HemiTruckClub.com 2008