Visit our Website   Visit Our Sponsor Superchips
HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Brakes/Brake upgrades  Hop To Forums  Rotors/Pads    Trucks shakes when coming to a stop???

Moderators: MrHemi
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Picture of U.S. Sailor
Posted
Hey guys, I'm new and my guess here would be a warped rotor maybe. The truck drives great! When I hit the brakes it shakes a little bit but more so when I get slower. What do you think rotors?


I'm a Sailor in the world's strongest Navy and I'm PROUD to serve you.
 
Posts: 8 | Location: Anacortes, WA | Registered: 12 June 2008Reply With QuoteEdit or Delete MessageReport This Post
"Dave"

VP
Kentucky Chapter

Truck of the Month
April 2006

Picture of HemiByrd
Posted Hide Post
Sounds like warped rotors. That is how my '05 acted before the dealership replaced my front rotors under warranty at 10,000 miles. The replacement rotors have almost 14,000 miles on them with no problem. If you replace your rotors you may want to upgrade at the same time.


2005 RCSB 1500 SLT 5.7 Hemi Ram - 4 inch ram air from fog light hole - Amsoil drop-in filter - AirAid MIT - Taylor shorty wires
Flowmaster 50HD SI/SO 3” - General Grabber UHP 295/50 20 tires - Superchips Flashpaq 3815 - Race weight 4795 lbs
Best 1/8 mile 9.28 @ Bowling Green - Best 1/4 mile 14.51 @ Bowling Green






 
Posts: 13687 | Location: Draffenville, Kentucky | Registered: 29 August 2005Reply With QuoteEdit or Delete MessageReport This Post
Picture of U.S. Sailor
Posted Hide Post
Dave
I really appreciate it, I thought that's what it seemed like. I'll definitely take your advice and upgrade at the same time. You're the VP of the Kentucky chapter? I'm stationed in Washington State with the navy but originally from Hancock Co. About 30 miles East of Owensboro. Thanks again.


I'm a Sailor in the world's strongest Navy and I'm PROUD to serve you.
 
Posts: 8 | Location: Anacortes, WA | Registered: 12 June 2008Reply With QuoteEdit or Delete MessageReport This Post
"Dave"

VP
Kentucky Chapter

Truck of the Month
April 2006

Picture of HemiByrd
Posted Hide Post
quote:
Originally posted by U.S. Sailor:
Dave
I really appreciate it, I thought that's what it seemed like. I'll definitely take your advice and upgrade at the same time. You're the VP of the Kentucky chapter? I'm stationed in Washington State with the navy but originally from Hancock Co. About 30 miles East of Owensboro. Thanks again.
Cool! I'm in Marshall County about 4 miles West of Kentucky Lake.

Thank you for your service to our country. Salute


2005 RCSB 1500 SLT 5.7 Hemi Ram - 4 inch ram air from fog light hole - Amsoil drop-in filter - AirAid MIT - Taylor shorty wires
Flowmaster 50HD SI/SO 3” - General Grabber UHP 295/50 20 tires - Superchips Flashpaq 3815 - Race weight 4795 lbs
Best 1/8 mile 9.28 @ Bowling Green - Best 1/4 mile 14.51 @ Bowling Green






 
Posts: 13687 | Location: Draffenville, Kentucky | Registered: 29 August 2005Reply With QuoteEdit or Delete MessageReport This Post
Picture of HeminatorTom
Posted Hide Post
Get the NAPA fully warranted high performance slotted and drilled rotors and their high performance pads. You will not regret it and they cost a little less.


Success is not final, failure is not fatal: it is the courage to continue that counts".



 
Posts: 2174 | Location: Austin, AR | Registered: 11 February 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of Mid-Tenn-Hemi
Posted Hide Post
iagreeThey are great. I have them all the way around and am very pleased with them.


Steve

04 Ram 1500 Hemi SLT, K&N CAI, Flowmaster 50 series, Billet grill, Billet gas door, Taylor shorties, NGK 4306, NAPA high Performance Rotors and pads (all 4), Extang Tonno, More to come...

http://profile.myspace.com/index.cfm?fuseaction=user.vi...le&friendid=41540334





 
Posts: 193 | Location: Columbia, Tennessee | Registered: 26 December 2007Reply With QuoteEdit or Delete MessageReport This Post
President
Alabama Chapter
Picture of cruel1
Posted Hide Post
quote:
Originally posted by HeminatorTom:
Get the NAPA fully warranted high performance slotted and drilled rotors and their high performance pads. You will not regret it and they cost a little less.


iagree


______________________________________________________________________________
2003 Ram 1500 Quad Cab 5.7L Hemi "Lone Star Edition".

Performance:
Flowmaster Muffler with Dual Tips / Bomz Racing Dual Filter Cold Air Induction / Napa Cross Drilled/Slotted Rotors and Pads

Appearence:
Vtech Ram Head Tail Light Covers / MAAP Step Rails / Mopar Window Ventvisors / Mopar Chrome Bug Guard / Mopar Chrome Gas Door / Mopar Chrome Grill Inserts / Debadged Tailgate

Audio:
Pioneer headunit / Sony Amp / Lightning Audio 10" Sub / Scosche and Phoenix Gold Wiring and Components

http://www.cardomain.com/ride/2958142

HTC Titan Killer



 
Posts: 1254 | Location: Huntsville, AL | Registered: 18 January 2008Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Brakes/Brake upgrades  Hop To Forums  Rotors/Pads    Trucks shakes when coming to a stop???

Copyright HemiTruckClub.com 2008