Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
Hey Guys:
Quick question, sometime when I backup my truck I hear a loud strange groan, for a couple seconds and then it goes away. Recently I hear it once in a while when I take off in drive as well. Does not happen all the time either. it is not a creak or a mechanical noise (or a grinding noise), just a loud groan. thanks for any info you can give. |
|||
|
I think I have the same noise. It's difficult to explain and you can almost "feel" the sound. Mine has done it off and on from a start and backing up. It seems to be worse with a load or on a hill.
I hope somebody has some ideas on what it is because I am stumped. |
||||
|
Yeah, I know. I don't know if it is just a noise or trouble brewing, it has been happening for about a year on and off.
|
||||
|
sure its not brake noise you are hearing
 My cammed hemi http://www.youtube.com/watch?v=hw1lDSLSKgc JOHNNYHEMI Stu cam 218/218 112LSA spartan max, 6.1 rods, 6.1 springs,Tuned, Hedman Longtubes, Dual 3" dynomax bullets, NO cats, SRT-10 rear axel swap D-60 LSD,4.10 gears srt-10 dual piston vented rear brakes SHARADON STAGE III VALVEBODY, Lincoln 18" E-Fan,TransgoHDReprogram SHift Kit with resistor, Taylor Shorties,mcgaughys 2/4 drop, Custom painted bumpers, shaved and painted grille shell, rumble bee grille inserts, Debadged, |
||||
|
 |
my truck also groans, but only when i first start the truck up and put it into reverse. i tried a few things and this is what i found to be the case, the hemi engine starts and revs pretty high. and if you dont let it "calm down" to a full idle and put it into reverse your truck begins to move so your foot is still on the brake, the groan in my case were the brakes dragging, give that a shot let me know what ya think?!
2007 Candy Blue Q/C HEMI 4x4 Resonator back Magnaflow Super Single 3" Stainless Exhaust K&N drop in filter Sirius Radio Extreme Driver "Real Men Race on A Track" |
|||
|
"Rob" VP Alaska Chapter  |
That is hoe my truck sounded... I took it in and I have a bad pump bearing!!
 2008 Dodge Durango 4x4 SLT HEMI and 2007 Dodge Ram 1500 4x4 SLT Quad Cab HEMI www.lubedealer.com/99705/            April 25, 2007!! |
|||
|
 |
 2006 Black Mega Cab Current mods: Access tonneau cover, 3rd Strike CAI,Tekonsha PRIMUS Trailer Brake Controller, Sumitt Turbo Muffler, Tow Mirrors, Tranny Temp Gauge in SRT A Pillar Pending Mods: Tuner, Tint Front Windows, Nerf Bars  |
|||
|
I don't think mine is any kind of brake noise. It used to be occasionally in reverse and when starting from a stop for a second or two. It now seems to make the same noise even after accelerating for a few seconds. It is louder and lasts longer than it used to.
It is almost a "harmonic" noise, not any kind of grind or metal on metal type of noise. |
||||
|
what year and is it 4x4
My cammed hemi http://www.youtube.com/watch?v=hw1lDSLSKgc JOHNNYHEMI Stu cam 218/218 112LSA spartan max, 6.1 rods, 6.1 springs,Tuned, Hedman Longtubes, Dual 3" dynomax bullets, NO cats, SRT-10 rear axel swap D-60 LSD,4.10 gears srt-10 dual piston vented rear brakes SHARADON STAGE III VALVEBODY, Lincoln 18" E-Fan,TransgoHDReprogram SHift Kit with resistor, Taylor Shorties,mcgaughys 2/4 drop, Custom painted bumpers, shaved and painted grille shell, rumble bee grille inserts, Debadged, |
||||
|
'05 4x4
|
||||
|
| Powered by Eve Community |
 | Please Wait. Your request is being processed... |
|
Copyright HemiTruckClub.com 2009