Visit our Website   Visit Our Sponsor Superchips
HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Drivetrain info  Hop To Forums  Transmission info    2003 TCM pin #10 mod done!

Moderators: MrHemi
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Posted
After reading through some of the archives, I found mention of a mod to the 2003 TCM's only and decided to see what it was about. This mod onlt comes into play at WOT, and it definitely firms up the shifts. The shifts are still not where I would like them so I will still do a Transgo 45RFE-HD2 kit either this fall or next spring. Now onto pics...

Find the TCM and connector





Pull the connector and plastic cover...





Remove the red pin holder



And remove pin #10



2003 Ram 2500 Quad Cab 4x4, Hemi, 5 speed auto, 3.73 gears and limited slip.
 
Posts: 18 | Location: New Haven, NY - Snow Country | Registered: 07 August 2007Reply With QuoteEdit or Delete MessageReport This Post
"Mark"

Forum
Manager


Former Hemi
truck owner

Picture of MrHemi
Posted Hide Post
Great step-by-step... thanks!


______________________________________________________________________________

HTC.com web site
HTC.com store
HTC.com calendar
HTC.com National map

2003 Hemi Ram - Supercharged. 520 HP, 14 mpg... traded in for a
2006 SRT8 Grand Cherokee - bone stock. 420 HP, 16 mpg... traded in for a
2007 BMW 335i - twin turbo. 325 HP, 33 mpg


 
Posts: 26391 | Location: South Mills, NC | Registered: 19 June 2004Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
I got the procedure Courtesy of CentralTexHemi:

1)Disconnect battery
2)Remove the TCM connector by loosening the 8mm bolt (black plastic cover over wire bundle on passenger side firewall/inner fender corner).
3)Remove the plastic shroud over the connector wire bundle. Has 4 clips holding it on.
4)Locate pin #10 with the yellow wire/ green stripe.
5)Remove the red clip on the TCM side secureing the group of wires having pin #10. Be gentle, I found a small thin knife blade works well. Pry up a little on each corner of the clip at a time.
6)Once the red clip is removed, you will need a straight pin and a flash light. Using the flashlight, look down inside the connector where the red clip was and you will see a small tab holding each wire in place. Use the straight pin to pry the tab away from the wire slightly and at the same time push pin 10 wire into the connector then pull out. The wire should pull out fairly easy doing this step correctly.
7) Once out, replace the red clip, tape the end of pin 10 wire with electrical tape and bundle it on top of the wire bundle going into the connector. Replace the plastic shroud over the wire bundle then replace the connector into the TCM and tighten the 8mm bolt being careful not to over tighten.
8) Reconnect the battery


2003 Ram 2500 Quad Cab 4x4, Hemi, 5 speed auto, 3.73 gears and limited slip.
 
Posts: 18 | Location: New Haven, NY - Snow Country | Registered: 07 August 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of JohnnyNitrous
Posted Hide Post
Does this only work on 03?


__________________________
Jack 'em up high, fat chicks can't climb!!!

04 Quad Cab Graphite Laramie, K & N CAI, Flowmaster super 40 dumped, SUPERCHIPS 3815, Taylor shorties w/NGK 5306, Amsoil fluids, de-badged, Line-X, 305/55R20 Nitto Terra Grapplers, torsion bars cranked, Bilstein shocks, Fire and Ice
 
Posts: 228 | Location: Surrey, British Columbia | Registered: 20 September 2007Reply With QuoteEdit or Delete MessageReport This Post
"Mark"

Forum
Manager


Former Hemi
truck owner

Picture of MrHemi
Posted Hide Post
quote:
Originally posted by JohnnyNitrous:
Does this only work on 03?
Yes... just the '03 models - the only year the PCM and TCM were separate units.


______________________________________________________________________________

HTC.com web site
HTC.com store
HTC.com calendar
HTC.com National map

2003 Hemi Ram - Supercharged. 520 HP, 14 mpg... traded in for a
2006 SRT8 Grand Cherokee - bone stock. 420 HP, 16 mpg... traded in for a
2007 BMW 335i - twin turbo. 325 HP, 33 mpg


 
Posts: 26391 | Location: South Mills, NC | Registered: 19 June 2004Reply With QuoteEdit or Delete MessageReport This Post
Picture of gary_lytle
Posted Hide Post
Was wondering what this does for the tranny.
Thanks


-----------------------------------
'03 Ram 1500 4x4 Laramie Sport
No Mods To the Truck. Not counting lights and siren.
 
Posts: 166 | Location: Payneville, KY | Registered: 28 October 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
good to see pictures I still cant figure out how to get that darn little red part out

have to go over grandpa's house I'm sure he has something useful to get it out


2003 HEMI RAM
AEM brute force,5W-30 Royal Purple,Gibson Super Truck Exhaust, what next who knows mmwwwaahhhhaaahahahahaha!!!!!!!!


 
Posts: 1041 | Location: Woodhaven, Michigan | Registered: 29 November 2005Reply With QuoteEdit or Delete MessageReport This Post
Picture of patches906
Posted Hide Post
Is this feature nulled when using the SC programmer?
What happens to functions of the truck?
I.E. shifting/braking/throttle response/OD
I thought this diabled ABS...Confused

2003 4x4 w/SC intalled.

patches

This message has been edited. Last edited by: patches906,



 
Posts: 107 | Location: Pensacola, FL | Registered: 09 July 2005Reply With QuoteEdit or Delete MessageReport This Post
Off-Road Suspension
Consultant




Picture of Freeze
Posted Hide Post
quote:
Originally posted by patches906:
Is this feature nulled when using the SC programmer?
What happens to functions of the truck?
I.E. shifting/braking/throttle response/OD
I thought this diabled ABS...Confused

2003 4x4 w/SC intalled.

patches

No
The shifts get faster/firmer. ABS and other systems remain unaffected.


'03 Black SLT QC SWB 4x4 Off-Road -- 35 x 12.50 Dick Cepek FCII's on 17 x 9 Centerline Dorsals -- AirAid Intake System w/ AMSOIL synthetic filter -- Comp 260 cam -- Manley springs, retainers, & pushrods -- JBA Cat-4ward mids -- Borla cat-back exhaust --Superchips -- Mark VIII e-fan w/ FK60 -- 8.2mm Taylors-- 180 deg t-stat -- AMSOIL -- Torsion bar lift (re-keyed) -- Bilstein 5125 shocks (BE5-6140-T5 front / BE5-6248-H5 rear) -- Hella Black Magics -- bunch of other stuff

Coming soon: Rough Country X-Lift up front, Deaver progressive leaf springs in back, and longer Bilsteins all around.

"An appeaser is one who feeds a crocodile, hoping it will eat him last." - Sir Winston Churchill

HTC Titan killer

 
Posts: 10976 | Location: Virginia Beach, VA | Registered: 21 June 2004Reply With QuoteEdit or Delete MessageReport This Post
Picture of patches906
Posted Hide Post
quote:
No
The shifts get faster/firmer. ABS and other systems remain unaffected.


Thanks Freeze

Patches



 
Posts: 107 | Location: Pensacola, FL | Registered: 09 July 2005Reply With QuoteEdit or Delete MessageReport This Post
Picture of henkster312
Posted Hide Post
ok guys
If I pull the wire and Pull a travel trailer doesn't it mess up the tranny???

because the torque could be too much for the tranny pulling a 21 ft traler that has a weight of 6400Lbs without water adn so on.

what is the thought about this.

thanks
Henk


What would a pilot do without a crewchief!!!
_______________




 
Posts: 17 | Location: Clearfield, Utah | Registered: 07 June 2008Reply With QuoteEdit or Delete MessageReport This Post
"Mark"

Forum
Manager


Former Hemi
truck owner

Picture of MrHemi
Posted Hide Post
The TCM mod affects the tranny's shift points at WOT (Wide Open Throttle) only... pulling a trailer should not be a problem.


______________________________________________________________________________

HTC.com web site
HTC.com store
HTC.com calendar
HTC.com National map

2003 Hemi Ram - Supercharged. 520 HP, 14 mpg... traded in for a
2006 SRT8 Grand Cherokee - bone stock. 420 HP, 16 mpg... traded in for a
2007 BMW 335i - twin turbo. 325 HP, 33 mpg


 
Posts: 26391 | Location: South Mills, NC | Registered: 19 June 2004Reply With QuoteEdit or Delete MessageReport This Post
Picture of Hemified3500
Posted Hide Post
Could you just cut the wire and seal up the ends?
Thanks,
Keven


2003 Hemi Ram 3500 Dually
1999 Chrysler Town & Country
1999 Chrysler 300M
1969 Cuda FastBack 600 HP 440
1998 Harley Davidson Electraglide
 
Posts: 10 | Location: Hamilton Ontario Canada | Registered: 30 November 2008Reply With QuoteEdit or Delete MessageReport This Post
President
Kansas Chapter
Picture of TheBoss
Posted Hide Post
quote:
Originally posted by Hemified3500:
Could you just cut the wire and seal up the ends?
Thanks,
Keven


Yes, but get the right wire, lol. I believe it's the yellow wire with the green stripe.


Photobucket - Video and Image Hosting


"Ability is what you're capable of doing. Motivation determines what you do. Attitude determines how well you do it." - Lou Holtz


Support a fellow members good cause. www.lexislamb.org


 
Posts: 4313 | Location: KC, Kansas | Registered: 06 December 2006Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Drivetrain info  Hop To Forums  Transmission info    2003 TCM pin #10 mod done!

Copyright HemiTruckClub.com 2008