Visit our Website   Visit Our Sponsor Superchips
HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Drivetrain info  Hop To Forums  Transmission info    Not another tranny Gauge question.....

Moderators: MrHemi
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Hemi4ever
Truck of the Month
August 2008

Picture of Hemi4ever
Posted
Russ / BigArt-

I know guys have installed your tranny temp gauges without the need for a new tranny pan with fitting.

Question is where is the test port on our trannys so I can install the sender?

I have the Autometer Ultra-Lite Dig 6579 unit with wiring harness and 1/8 npt (male) sending unit.

Wiring up is easy, but finding where to put that damn sender is my issue.

Can anyone help?


SCOTT

353 HP / 343.1 TQ STREET READY, Best 1/4= 14.0 @96.1 MPH 2.0 60 foot. With the perfect rection of .000 time
 
Posts: 1434 | Location: Castro Valley, CA | Registered: 11 September 2005Reply With QuoteEdit or Delete MessageReport This Post
BigART
Filter and Lubrication Consultant


Picture of BigART
Posted Hide Post
Russ has the analog and it will fit in the test port on the tranny.


Yours should be like mine and I had to make an adapter. Remember near my front passenger inner fender? That's it. It's easy to do.


____________________________________________________
2003 Dodge Ram 1500 QC SB 5.7L Hemi Express Limited Edition
Performance Mods:
Bomz Air Intake w/AMSOIL EAAU3590 Air Filter, 295/50 General Grabber UHP Tires, AMSOIL'd EVERYTHING!, Jet Stream, IAT mod, Superchip, FlowMaster SUV SI/SO, Thundervolt Full Length Wires, NGK Iridiums, AMSOIL By-Pass Kit, Power Slot Rotors w/EBC Green Pads, TCM wire pulled, Bilstein Shocks, APS Torque Converter 2500 Stall, Transgo Shift Kit, 195 T-Stat, Helwig Rear Anti Swaybar, Moe's Traction Bars w/Shims, Ground Force 2" Drop Shackles, 6.1 Cam w/Manley Springs, 6.1 Rods & Titanium Retainers, Viper Fan w/FK60 controller, Pacesetter Long Tubes & Y Pipe, Flowtech Exhaust Cutout, ATI 5% UD Harmonic Balancer, 4.10 Sierra Gears, M&H Slicks

Best 60ft 1.973
14.172@93.99MPH 345HP/346Torque

Future Mods: Custom Grind Cam and Heads

AMSOIL Dealer - www.PureSyn.net 877-778-7379, contact me for more info on wholesale or a free catalog.
 
Posts: 2373 | Location: Union City, CA | Registered: 13 November 2006Reply With QuoteEdit or Delete MessageReport This Post
chefred112
Picture of chefred112
Posted Hide Post
test port should be really close to where the cooler lines are above the tranny oan


Stu's Spartan cam-Stu's Big valve heads-4.10 gears-Mark VIII efan-pacesetter LT's-shift kit- RamHammer CAI-true dual exhaust-Magnaflow dumped-dual DMH e-cutout- SC Flashpaq-PSC1 tuner-180 t-stat

60ft - 1.832, 1/8 - 8.39, 1/4 - 13.356@99.12
 
Posts: 1540 | Location: Newark, CA | Registered: 10 January 2007Reply With QuoteEdit or Delete MessageReport This Post
"*Damn*its*gotta*Hemi*"
"Russ"

Member,
Board of Directors


Picture of "*Damn*its*gotta*Hemi*"
Posted Hide Post
your 05 ram manual should show you where the test ports are on the tranny. you want the top one. i may have a thread on here with pics of where it went. art has his inline, that may be the way to go. super easy install, you where there for it buddy, took me like 30 minutes or so, and thats with all of my ineptitudes at wiring.




My Facebook - http://www.facebook.com/profile.php?id=581437357

HTC Titan Killer

Some Fun Stuff
6.1 best time
Reaction time: .039
60 foot: 2.394
1/8: 9.955 @ 72.482
1/4: 15.284@ 92.649

260 Best time
RT 0.136
60' 2.290
330' 6.440
1/8 9.849 @ 72.73
1/4 15.193 @ 91.853
 
Posts: 13742 | Location: Ceres, CA | Registered: 19 July 2004Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Drivetrain info  Hop To Forums  Transmission info    Not another tranny Gauge question.....

Copyright HemiTruckClub.com 2008