Visit our Website   Visit Our Sponsor Superchips
HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Exterior  Hop To Forums  Other exterior talk    HELP!! Whistling from handles!!!

Moderators: MrHemi
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Picture of Mid-Tenn-Hemi
Posted
My truck has developed a whistle when the air is on high, which is quite often with temps above 90. After some research with a water hose on the outside of truck, I discovered air blowing out from around the door handles. I pulled off the door panels and tightened the handles. No luck, still whistling, If I am moving it stops. When I am sitting still it whistles. It is pretty loud, can be heard about 20 feet away. Any ideas or solutions.

This message has been edited. Last edited by: Mid-Tenn-Hemi,


Steve

04 Ram 1500 Hemi SLT, K&N CAI, Flowmaster 50 series, Billet grill, Billet gas door, Taylor shorties, NGK 4306, NAPA high Performance Rotors and pads (all 4), Extang Tonno, More to come...

http://profile.myspace.com/index.cfm?fuseaction=user.vi...le&friendid=41540334





 
Posts: 193 | Location: Columbia, Tennessee | Registered: 26 December 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of Solar_Ram
Posted Hide Post
you could try some of that one sided sticky rubber some guys use for sound proofing and wrap it around the inside of the handles.



'05 Sport,RC.
new mods from the shade tree shop: a few Six Pack Hoods, hand made Stainless Steel 1/2" Hood Pins.

Survivor of "Hemi in The Hills III" and "Pigeon Forge 2007"

See my ride here.
 
Posts: 3272 | Location: Hurricaneally, FL | Registered: 11 December 2005Reply With QuoteEdit or Delete MessageReport This Post
Picture of Mid-Tenn-Hemi
Posted Hide Post
Thanks Solar Ram. Where would I find that?


Steve

04 Ram 1500 Hemi SLT, K&N CAI, Flowmaster 50 series, Billet grill, Billet gas door, Taylor shorties, NGK 4306, NAPA high Performance Rotors and pads (all 4), Extang Tonno, More to come...

http://profile.myspace.com/index.cfm?fuseaction=user.vi...le&friendid=41540334





 
Posts: 193 | Location: Columbia, Tennessee | Registered: 26 December 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of Solar_Ram
Posted Hide Post
easiest place I think would be Best Buys or Circuit City for the soundproofing rubber sheet or go to home depot or Lowe's by the roofing dept. and you may find a piece of waterproofing material, like ice and water shield. it's just flat rubber sheets or rolls with sticky surface on 1 side.
let it set in the sun to get it all soft and rubbery and it'll be easier to wrap the area.



'05 Sport,RC.
new mods from the shade tree shop: a few Six Pack Hoods, hand made Stainless Steel 1/2" Hood Pins.

Survivor of "Hemi in The Hills III" and "Pigeon Forge 2007"

See my ride here.
 
Posts: 3272 | Location: Hurricaneally, FL | Registered: 11 December 2005Reply With QuoteEdit or Delete MessageReport This Post
"Josh"

President,
Georgia Chapter
Picture of GaTechHemi
Posted Hide Post
I had a pretty terrible whistle on high AC a while ago...used shop air to blow the crap out of all the vents (horrified at what came out!) and it went away...you sure the whistle is coming from the handles??


'04 1500 QC 4x4, off-road and towing packages

My MySpace Page
My Lab Profile



 
Posts: 2253 | Location: Marietta, GA | Registered: 24 September 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of Mid-Tenn-Hemi
Posted Hide Post
100% sure. I thought it was coming from around he doors. Took a hose and ran water on doors. I looked down and saw bubbles around the handles. When I pushed on the handle, it stopped.
BTW how did you blow out your vents?


Steve

04 Ram 1500 Hemi SLT, K&N CAI, Flowmaster 50 series, Billet grill, Billet gas door, Taylor shorties, NGK 4306, NAPA high Performance Rotors and pads (all 4), Extang Tonno, More to come...

http://profile.myspace.com/index.cfm?fuseaction=user.vi...le&friendid=41540334





 
Posts: 193 | Location: Columbia, Tennessee | Registered: 26 December 2007Reply With QuoteEdit or Delete MessageReport This Post
"Josh"

President,
Georgia Chapter
Picture of GaTechHemi
Posted Hide Post
quote:
Originally posted by Mid-Tenn-Hemi:
BTW how did you blow out your vents?

Put the fan on high...and blew compressed air in there...all kinds of garbage came flying out...any detailing place will do it for you, and probably do a better job.


'04 1500 QC 4x4, off-road and towing packages

My MySpace Page
My Lab Profile



 
Posts: 2253 | Location: Marietta, GA | Registered: 24 September 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of Mid-Tenn-Hemi
Posted Hide Post
Thanks GaTechHemi. I will try that this weekend.


Steve

04 Ram 1500 Hemi SLT, K&N CAI, Flowmaster 50 series, Billet grill, Billet gas door, Taylor shorties, NGK 4306, NAPA high Performance Rotors and pads (all 4), Extang Tonno, More to come...

http://profile.myspace.com/index.cfm?fuseaction=user.vi...le&friendid=41540334





 
Posts: 193 | Location: Columbia, Tennessee | Registered: 26 December 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of U_N_V_MY_HEMI
Posted Hide Post
 
Posts: 463 | Location: Waxahachie/Kemp TX | Registered: 22 February 2008Reply With QuoteEdit or Delete MessageReport This Post
Picture of Mid-Tenn-Hemi
Posted Hide Post
quote:
WHAT YEAR IS YOUR TRUCK?

04


Steve

04 Ram 1500 Hemi SLT, K&N CAI, Flowmaster 50 series, Billet grill, Billet gas door, Taylor shorties, NGK 4306, NAPA high Performance Rotors and pads (all 4), Extang Tonno, More to come...

http://profile.myspace.com/index.cfm?fuseaction=user.vi...le&friendid=41540334





 
Posts: 193 | Location: Columbia, Tennessee | Registered: 26 December 2007Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Exterior  Hop To Forums  Other exterior talk    HELP!! Whistling from handles!!!

Copyright HemiTruckClub.com 2008