Banners HemiTruckClub.com Website DiabloSport Website Superchips Website Henson Motor Sports Website 3rd Strike Performance We Support Our Troops United States of America Canada United Kingdom Belgium Iceland France Germany Puerto Rico South Africa Guam Netherlands

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Exterior  Hop To Forums  Paint & Finish    Rollpan install-what NOT to do....

Moderators: MrHemi
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
"Ken"



Secretary
California Chapter
Posted
Got a good deal on a steel rollpan a few weeks ago from Stylin' Trucks for about $130 shipped. It was there "EFX" model. Very nice quality. The fit out of the box was very tight. Here is a picture of it installed:


04 Atlantic Blue RC/SB-1500/2wd -4.10's/lsd/17's,Superchips,PSC-001,Ramhammer,Airram scoop,JBA headers,custom y-pipe, Magnaflow muffler(SI/DO)dumped, Comp 260 cam,6.1 springs,6.1 pushrods,180 t-stat,NGK 4306's,Taylor shorty's,Western Chassis 2/4 drop,and a few things not yet installed......


 
Posts: 1108 | Location: Daly City, CA | Registered: 13 August 2004Reply With QuoteEdit or Delete MessageReport This Post
"Ken"



Secretary
California Chapter
Posted Hide Post
..but,during the fitting process,I neglected to tape the edges where the rollpan comes in contact with the bedsides and scratched the right side leading edge. Of course,it took me more than a few times to line up the pan-so the scratching occurred a few times..


04 Atlantic Blue RC/SB-1500/2wd -4.10's/lsd/17's,Superchips,PSC-001,Ramhammer,Airram scoop,JBA headers,custom y-pipe, Magnaflow muffler(SI/DO)dumped, Comp 260 cam,6.1 springs,6.1 pushrods,180 t-stat,NGK 4306's,Taylor shorty's,Western Chassis 2/4 drop,and a few things not yet installed......


 
Posts: 1108 | Location: Daly City, CA | Registered: 13 August 2004Reply With QuoteEdit or Delete MessageReport This Post
"Ken"



Secretary
California Chapter
Posted Hide Post
..and,during the re-installing of the tailgate,i misjudged the weight of it and dropped it on the ground,slightly bending the right lower corner of the gate. I tried to zoom in a little on the shot....


04 Atlantic Blue RC/SB-1500/2wd -4.10's/lsd/17's,Superchips,PSC-001,Ramhammer,Airram scoop,JBA headers,custom y-pipe, Magnaflow muffler(SI/DO)dumped, Comp 260 cam,6.1 springs,6.1 pushrods,180 t-stat,NGK 4306's,Taylor shorty's,Western Chassis 2/4 drop,and a few things not yet installed......


 
Posts: 1108 | Location: Daly City, CA | Registered: 13 August 2004Reply With QuoteEdit or Delete MessageReport This Post
"Ken"



Secretary
California Chapter
Posted Hide Post
So,the ironic part of this story is: I was just going to have the bodyshop paint the pan off of the truck. I tried to save some money on labor (from the bodyshop) by removing the bumper assembly and pre-fitting the pan myself. Now,I have to have the scratched section of bedside painted as well as the tailgate repaired. Also,if you look at the first post,I had a dent in the tailgate from before-I decided to have them repair that while the truck was there and re-shoot the entire tailgate. I am picking it up tomorrow....


04 Atlantic Blue RC/SB-1500/2wd -4.10's/lsd/17's,Superchips,PSC-001,Ramhammer,Airram scoop,JBA headers,custom y-pipe, Magnaflow muffler(SI/DO)dumped, Comp 260 cam,6.1 springs,6.1 pushrods,180 t-stat,NGK 4306's,Taylor shorty's,Western Chassis 2/4 drop,and a few things not yet installed......
 
Posts: 1108 | Location: Daly City, CA | Registered: 13 August 2004Reply With QuoteEdit or Delete MessageReport This Post
"Ken"



Secretary
California Chapter
Posted Hide Post
..and for you 'detail' guys,I know the pic's show a real dirty truck,but,the shop is doing a full detail on the truck when it's done. I will post up the 'after' pictures(hopefully) by friday.


04 Atlantic Blue RC/SB-1500/2wd -4.10's/lsd/17's,Superchips,PSC-001,Ramhammer,Airram scoop,JBA headers,custom y-pipe, Magnaflow muffler(SI/DO)dumped, Comp 260 cam,6.1 springs,6.1 pushrods,180 t-stat,NGK 4306's,Taylor shorty's,Western Chassis 2/4 drop,and a few things not yet installed......
 
Posts: 1108 | Location: Daly City, CA | Registered: 13 August 2004Reply With QuoteEdit or Delete MessageReport This Post
Picture of Hemiguy05
Posted Hide Post
Sounds like a pain but its going to look very nice. thumb2


My Truck *** UPDATED ***

BREATHIN, BUMPIN, and DUMPED.



 
Posts: 602 | Location: Cornelius, NC | Registered: 22 September 2008Reply With QuoteEdit or Delete MessageReport This Post
"Mark"

Forum
Manager


Former Hemi
truck & Hemi
SUV owner

Picture of MrHemi
Posted Hide Post
iagree and goodjob


______________________________________________________________________________

HTC.com web site
HTC.com store
HTC.com calendar
HTC.com National map
After smoking a pack a day for 30 years, I quit cold turkey. Here's how I did it... SmokeTip - The Most Advanced Electronic Cigarette

2003 Ram 5.7 Hemi - Supercharged. 520 HP, 14 mpg... traded in for a
2006 SRT8 Grand Cherokee - bone stock 6.1 Hemi - 420 HP, 16 mpg... traded in for a
2007 BMW 335i - twin turbo. 330 HP, 33 mpg

 
Posts: 29851 | Location: South Mills, NC | Registered: 19 June 2004Reply With QuoteEdit or Delete MessageReport This Post
"Ken"



Secretary
California Chapter
Posted Hide Post
..thanks guys!


04 Atlantic Blue RC/SB-1500/2wd -4.10's/lsd/17's,Superchips,PSC-001,Ramhammer,Airram scoop,JBA headers,custom y-pipe, Magnaflow muffler(SI/DO)dumped, Comp 260 cam,6.1 springs,6.1 pushrods,180 t-stat,NGK 4306's,Taylor shorty's,Western Chassis 2/4 drop,and a few things not yet installed......
 
Posts: 1108 | Location: Daly City, CA | Registered: 13 August 2004Reply With QuoteEdit or Delete MessageReport This Post
Picture of speedmaniac
Posted Hide Post
i hate when i try to save myself money and it cost more doing that Frowner

Cant wait to see the final pics!


Bemobile Travel (looking to expand into other areas)
Southwest Corner of Kansas
Jeff Munson 620-629-7848
Book your Travel Needs: www.bemobile-travel.com
Join our vacation club: www.bemobile-vacations.com

 
Posts: 333 | Location: Kansas | Registered: 13 January 2009Reply With QuoteEdit or Delete MessageReport This Post
"Pimp Daddy Dave"



President
NJ Chapter

HTC.com Statistician

Truck of the Month
July 2008

Picture of HEMI DAVE K
Posted Hide Post
Man I can relate to that....$$$$$$cry
 
Posts: 11532 | Location: Clayton, NJ | Registered: 15 July 2006Reply With QuoteEdit or Delete MessageReport This Post
"Zachary"

VP
OK Chapter
Picture of zwa21
Posted Hide Post
That'll look nice. thumb2
 
Posts: 5481 | Location: Perry, Oklahoma | Registered: 18 May 2007Reply With QuoteEdit or Delete MessageReport This Post
"Bob"



President
AZ Chapter

Truck of the Year
2008


Truck of the Month
April 2008

Picture of motorscooter
Posted Hide Post
quote:
Originally posted by speedmaniac:
i hate when i try to save myself money and it cost more doing that Frowner

Cant wait to see the final pics!

X2



04 RUMBLE BEE #4669 Yellow
MODS :Stu's Spartan cam on 113 lsa,L/T Cerimic coated headers & y pipe,E-Fan,180 T-Stat,E-Cut Outs, Posi 456's, Shortie Wires,CAI,
06 R/T Daytona Charger top banana yellow #93

 
Posts: 3850 | Location: Tucson, AZ | Registered: 06 November 2005Reply With QuoteEdit or Delete MessageReport This Post
Picture of KB112
Posted Hide Post
Damn! That sucks Ken. When I was installing my torsion bar for the tailgate I dropped it. Creased the whole damn bottom right corner. Pissed me off bad! Should come out lookin great though Bro.


04 Ram 1500 2WD QC
Comp 260 cam, 6.1L Valve Springs, 6.1L Pushrods, AEM Long Tubes, 3" Flow Tech, AT3030, SC 91 Tune, 180* Thermo, Valdez Racing Intake, Hotchkis TVS

308HP/316TQ Dyno 2-18-07
9.113@70.814 MPH 10-19-08
14.365@95.470 MPH 10-19-08

 
Posts: 843 | Location: Brentwood, CA | Registered: 09 February 2007Reply With QuoteEdit or Delete MessageReport This Post


Picture of hemi06ram
Posted Hide Post
thumb2 That's the same one I used. Sorry to see you had some problems, I painted mine with a rattle can it turned out ok. goodluck1


"I just don't trust anything that bleeds for five days and doesn't die."

2006 Ram SLT,B&M Megashifter, True Duals X-Pipe with Cherry Bomb's,Superchips 3815,McGaughy 2/4 drop kit , K&N CAI 63, Debadged, Roll Pan, SRT-10 Hood, Wheel well liners.





 
Posts: 1513 | Location: Easley, SC | Registered: 10 September 2008Reply With QuoteEdit or Delete MessageReport This Post


Picture of chefred112
Posted Hide Post
dang Ken...at least the end product will look badass...now you have to consider dumping your exhaust to really clean up the appearance..


...FREDDIE...
Stu's Spartan cam-Stu's Big valve heads-4.10 gears-efan-pacesetter LT's-shift kit- RamHammer CAI-true dual exhaust-Magnaflow dumped-dual DMH e-cutouts- DS Predator with custom tune-180 t-stat-Caltracs

best 60ft - 1.797, 1/8th -8.26@79.65, 1/4 - 13.08@102.17


 
Posts: 2469 | Location: Newark, CA | Registered: 10 January 2007Reply With QuoteEdit or Delete MessageReport This Post
"Ken"



Secretary
California Chapter
Posted Hide Post
iagree-Fred--I hope to get the exhaust dumped before I leave for Los Banos on saturday afternoon....


04 Atlantic Blue RC/SB-1500/2wd -4.10's/lsd/17's,Superchips,PSC-001,Ramhammer,Airram scoop,JBA headers,custom y-pipe, Magnaflow muffler(SI/DO)dumped, Comp 260 cam,6.1 springs,6.1 pushrods,180 t-stat,NGK 4306's,Taylor shorty's,Western Chassis 2/4 drop,and a few things not yet installed......
 
Posts: 1108 | Location: Daly City, CA | Registered: 13 August 2004Reply With QuoteEdit or Delete MessageReport This Post
"Doug"





Truck of the
Month
April 2005
Picture of "RANCHER"
Posted Hide Post
thumb2 That's gona really look sharp. congrats
 
Posts: 24762 | Location: Emory, Texas | Registered: 30 July 2004Reply With QuoteEdit or Delete MessageReport This Post
"Al"



Picture of VA4MEDS
Posted Hide Post
iagree



Speed Safely,
AL
My AMSOIL Site

'06 HEMI Mega Cab 1500 4x4
All AMSOIL Fluids
HTC Branded
No Mods Listed For Security Reasons.




 
Posts: 351 | Location: Thomasville, Georgia | Registered: 28 February 2008Reply With QuoteEdit or Delete MessageReport This Post
Truck of the Month
August 2008

Picture of Hemi4ever
Posted Hide Post
Ken- Sorry to her about the scratches and dent to the tailgate. About i can relate, can't wait to see it in person.


" What is that ringing noise I keep hearing, you would think I'd have a phone or something "

 
Posts: 1908 | Location: Oakley, CA | Registered: 11 September 2005Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Exterior  Hop To Forums  Paint & Finish    Rollpan install-what NOT to do....

Copyright HemiTruckClub.com 2009