Banners HemiTruckClub.com Website DiabloSport Website Superchips Website Henson Motor Sports Website 3rd Strike Performance We Support Our Troops United States of America Canada United Kingdom Belgium Iceland France Germany Puerto Rico South Africa Guam Netherlands

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Exterior  Hop To Forums  Lights and Lighting    Fire & Ice tail light?
Page 1 2 

Moderators: MrHemi
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Picture of CTHemiGirl
Posted
Heya guys!

I just really wanted to vent that I just sent back my 4th set of lights to Stytlin' Trucks this morning. The first set I got ended up worked very well until shortly after the winter - the plastic ended up bubbling over on the left-hand side, so they sent me another one no charge.

Second set, reverse didn't light up - Third set reverse didn't work, Fourth set the entire left side didn't work...

If I didn't like the look of them so much, I'd have asked for my money back by now.

Anyone else have issues with them? Just curious...



Jaime Smiler
2006 Dodge Ram Hemi (Inferno Red Crystal Pearlcoat)
- Mopar Tonneau Cover
- AVS Vent Shades
- APC Cold Air Intake
- Small Antenna
- Ram Head Mud Flaps
- Ram Head License Frame
- "Wild Cherry" Seat Covers
- Ram Head Floor Mats (front and in Quad Cab)
- 3" Stainless Steel Step Bars
- Chrome-covered hood struts
- Chrome Bug Deflector
- Chrome gas cap
- Fire & Ice Tailight
- Magnaflow SI/DO muffler w. custom pipes & tips
- chrome-covered door/tail handles
- chrome gas door
- custom mesh bug guard

http://www.myspace.com/bluertjlp
http://www.facebook.com/bluertjlp
 
Posts: 76 | Location: South Windsor, CT | Registered: 18 August 2008Reply With QuoteEdit or Delete MessageReport This Post
"Pimp Daddy Dave"



President
NJ Chapter

HTC.com Statistician

Truck of the Month
July 2008

Picture of HEMI DAVE K
Posted Hide Post
Nope. Had mine over a year with no problems...hummm


Drive it like you stole it


Visit my web page
http://www.angelfire.com/planet/hemidavek/index.html

Stock: 350HP @ flywheel 245RWHP
MODS:400HP @ flywheel 315RWHP (est)

Best mod of all, my WIFE Susan :-)

 
Posts: 11528 | Location: Clayton, NJ | Registered: 15 July 2006Reply With QuoteEdit or Delete MessageReport This Post
"Jay"

Truck of the Month
December 2007
Picture of RaiderJay6
Posted Hide Post
same with me. no issues!


2007 Ram 1500 QC 5.7 Hemi 4x4
2008 Grand Cherokee 3.7 4x4





 
Posts: 3076 | Location: Upstate, NY | Registered: 23 June 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of JohnnyNitrous
Posted Hide Post
Mine fried after a few months. It wasnt sealed properly where the wires go in and it got wet and quit working on the left side. Still waiting to get a new one. Apparently they dont have the solid ones anymore so they send the flex bars which arent as bright. I guess I will see when I get the new one though.


________________________

 
Posts: 306 | Location: Surrey, British Columbia | Registered: 20 September 2007Reply With QuoteEdit or Delete MessageReport This Post
"Doug"





Truck of the
Month
April 2005
Picture of "RANCHER"
Posted Hide Post
Nope its her hemi had a bunch of trouble with his/hers. From what I've been hearing the newer ones don't work as well or last as long.
 
Posts: 24753 | Location: Emory, Texas | Registered: 30 July 2004Reply With QuoteEdit or Delete MessageReport This Post
"Dave"



Picture of GoManGo
Posted Hide Post
I think I'm going to try a Recon lite bar, anyone have one.


________________________
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
Bill of Rights ~ Amendment 11

Oderint dum Mervant

HTC Titan killer

 
Posts: 1812 | Location: Ridge Spring, SC | Registered: 11 December 2005Reply With QuoteEdit or Delete MessageReport This Post
"Doug"





Truck of the
Month
April 2005
Picture of "RANCHER"
Posted Hide Post
dunno Didn't know they made one. I have their 3rd breaklight, tail lights and headlights.
 
Posts: 24753 | Location: Emory, Texas | Registered: 30 July 2004Reply With QuoteEdit or Delete MessageReport This Post
"Dave"



Picture of GoManGo
Posted Hide Post
I found them the other day, here is the links.

http://www.gorecon.com/products.php?p_cat=75

http://www.gorecon.com/products.php?p_cat=25


________________________
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
Bill of Rights ~ Amendment 11

Oderint dum Mervant

HTC Titan killer

 
Posts: 1812 | Location: Ridge Spring, SC | Registered: 11 December 2005Reply With QuoteEdit or Delete MessageReport This Post



Picture of tigman250
Posted Hide Post
had to have mine replaced, they sent a flex bar and it's a turd Mad about half as bright as the original.

I did talk with Plasma Glow, they offered to let me pay (as much as a new light bar) to upgrade to a brighter bar.....I just wish they made the replacement as bright as the original Frowner


06 QC 4X4 Hemi Ram
Custom Cold Air Intake, Electric fan conversion, Custom catch cans, Bully Dog Power Pup, 3" Body Lift, Kicker 10" sub, Kicker 500.1 amp, custom sub enclosure, custom adjustable towing hitch......more to come

will weld for food

 
Posts: 388 | Location: Michigan | Registered: 01 May 2008Reply With QuoteEdit or Delete MessageReport This Post
"Doug"





Truck of the
Month
April 2005
Picture of "RANCHER"
Posted Hide Post
When someone produced a poor quality replacement that isn't as good or last as long as the original they've pretty well cut their on throats. Frowner
 
Posts: 24753 | Location: Emory, Texas | Registered: 30 July 2004Reply With QuoteEdit or Delete MessageReport This Post
Picture of xJoey Dubsx
Posted Hide Post
quote:
that isn't as good or last as long as the original they've pretty well cut their on throats.


On behalf of Stylin, our all red ones constantly have problems, and I prefer not to sell them, and I usually try to get the customer in to the fire and ice light bar. I've had 3 all red bars go out on me in my dakota, and put in a fire and ice, and never had a problem. Those are my taillights on my Dakota, since I am fully shaved in the rear, so it's important they work.

As far as switching to that new flex style, I don't agree with them. I hate the new one, and if I have to replace mine, I will have to drill a hole to feed it in, since my roll pan is completely welded in, and have no where for wires to come through, because of that stupid box..


Joey Dubs....
Black 2000 Dakota
Bagged and Shaved so I call it Solo
Black 2003 Ram Hemi
Got alot of horse, so I call it Polo
 
Posts: 185 | Location: Cleveland, Oh | Registered: 14 May 2009Reply With QuoteEdit or Delete MessageReport This Post
Picture of JohnnyNitrous
Posted Hide Post
I just had my second fire and ice stop working on the right side. This one only lasted a few days. I really like the look of these things but what the hell?


________________________

 
Posts: 306 | Location: Surrey, British Columbia | Registered: 20 September 2007Reply With QuoteEdit or Delete MessageReport This Post



Picture of tigman250
Posted Hide Post
the tail light portion of my new flex bar just quit working, brakes, blinkers and reverse all work just no tails. haven't gotten a chance to test the circuit to make sure power is going to the tails so I don't know for sure if the light bar is defective or if the connection went bad. I'll check it out in the morning.


06 QC 4X4 Hemi Ram
Custom Cold Air Intake, Electric fan conversion, Custom catch cans, Bully Dog Power Pup, 3" Body Lift, Kicker 10" sub, Kicker 500.1 amp, custom sub enclosure, custom adjustable towing hitch......more to come

will weld for food

 
Posts: 388 | Location: Michigan | Registered: 01 May 2008Reply With QuoteEdit or Delete MessageReport This Post



Picture of tigman250
Posted Hide Post
quote:
Originally posted by tigman250:
the tail light portion of my new flex bar just quit working, brakes, blinkers and reverse all work just no tails. haven't gotten a chance to test the circuit to make sure power is going to the tails so I don't know for sure if the light bar is defective or if the connection went bad. I'll check it out in the morning.


just went out and tested it, wiring is working perfectly, seems as though I have ANOTHER bad light bar......


06 QC 4X4 Hemi Ram
Custom Cold Air Intake, Electric fan conversion, Custom catch cans, Bully Dog Power Pup, 3" Body Lift, Kicker 10" sub, Kicker 500.1 amp, custom sub enclosure, custom adjustable towing hitch......more to come

will weld for food

 
Posts: 388 | Location: Michigan | Registered: 01 May 2008Reply With QuoteEdit or Delete MessageReport This Post
"Billy"



Truck of the Month
July 2009

Picture of JOKER
Posted Hide Post
i had a rampage for over a year now never had a problem




This is my Hemi, there's many like it but this one is mine.

 
Posts: 8706 | Location: Covington, GA | Registered: 08 January 2008Reply With QuoteEdit or Delete MessageReport This Post
"Doug"





Truck of the
Month
April 2005
Picture of "RANCHER"
Posted Hide Post
quote:
I have ANOTHER bad light bar......

Who did you buy it from? Are they replacing them without any hassle?
 
Posts: 24753 | Location: Emory, Texas | Registered: 30 July 2004Reply With QuoteEdit or Delete MessageReport This Post



Picture of tigman250
Posted Hide Post
quote:
Originally posted by "RANCHER":
quote:
I have ANOTHER bad light bar......

Who did you buy it from? Are they replacing them without any hassle?


I originally bought it from TX Rumbles here on HTC, he went above and beyond to help me get the first faulty one replaced going so far as to sending me a copy of the original reciept so I could mail it back to P/G with the bad bar. I have contacted P/G about the second bad bar and I havn't heard back from them yet, they were jonny on the spot the first time arround.... we'll see this time Confused


06 QC 4X4 Hemi Ram
Custom Cold Air Intake, Electric fan conversion, Custom catch cans, Bully Dog Power Pup, 3" Body Lift, Kicker 10" sub, Kicker 500.1 amp, custom sub enclosure, custom adjustable towing hitch......more to come

will weld for food

 
Posts: 388 | Location: Michigan | Registered: 01 May 2008Reply With QuoteEdit or Delete MessageReport This Post
"Doug"





Truck of the
Month
April 2005
Picture of "RANCHER"
Posted Hide Post
thumb2 As many problems as they've had with this new design looks like they would go back to the old tried and true style. goodluck
 
Posts: 24753 | Location: Emory, Texas | Registered: 30 July 2004Reply With QuoteEdit or Delete MessageReport This Post


Picture of HeminatorTom
Posted Hide Post
I have ASP fire lights on our Hemi and they are two years old with no problems. Bought them through Stylin Trucks at $39.00.


Success is not final, failure is not fatal: it is the courage to continue that counts".


 
Posts: 3356 | Location: Austin, AR | Registered: 11 February 2007Reply With QuoteEdit or Delete MessageReport This Post



Picture of tigman250
Posted Hide Post
Called PlasmaGlow two days ago, left a message with the warranty dept. because no one would answer. tried calling again today about five times still no answer. I called again pushed the sales number and got a human being on the other end, he took my contact info and said he would have the warranty guy call me right back.....that was about ten hours ago Mad


06 QC 4X4 Hemi Ram
Custom Cold Air Intake, Electric fan conversion, Custom catch cans, Bully Dog Power Pup, 3" Body Lift, Kicker 10" sub, Kicker 500.1 amp, custom sub enclosure, custom adjustable towing hitch......more to come

will weld for food

 
Posts: 388 | Location: Michigan | Registered: 01 May 2008Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community Page 1 2  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Exterior  Hop To Forums  Lights and Lighting    Fire & Ice tail light?

Copyright HemiTruckClub.com 2009