Hey Guy's and Gals, I noticed a problem with my new fog lights, last night driving home I thought I would try my new foglights, they run for a bout 20 minutes , flickered and then died, I went from the stock 2 lights to 3, on my big moose bumper any suggestions as to whats happening here, thanks

quote:

Originally posted by 50 torpedo:
I went from the stock 2 lights to 3

Are these all on the same wiring system? A stock system for 2 lights prob isn't setup for 3? You may want to check the relay of fuse.

sounds over loaded

Dan O, yes I did just splice into the existing wiring harness, not being electrically minded, I might have overloaded it, now how do I check it out,thanks

I would just get a kit with two lights and install that. It will come with the lights, fuses, switch, relay, and wiring harness. All you will have to do is find a fuse to piggyback and ground. Then bring the harness into the cab and install the switch somewhere on the dash. This is the best way.
As far as where to hook up the positive, maybe one of our wiring gurus would know.