Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
 |
I just lowered my truck and I was goin to set the pinion angle at -2 degree. Is that a good setting or do I need to go lower or higher?
03 ram, 20' wheels, K&N cold air intake, flowmaster super 44 exhaust, custom tailgate pin-stripping, lowered 2'-4', Mtx 10's and amp in a custom box, 10 pin upgrade, Bully dog power pup programmer, de-bagged, and billet grille     |
||
|
have you checked the actual angle? my friend has an f-150 with a 3/5 drop, i can find out what shims we put in his truck i cant remember, but it really helped alot, you will notice the difference, if you are getting a vibration right now, with the shims it will go away, plus it is alot easier on the rearend.
 JOHNNYWITHAHEMI SRT-10 rear axel swap D-60 LSD,4.10 gears srt-10 dual piston vented rear brakes SHARADON STAGE III VALVEBODY, Lincoln 18" E-Fan,TransgoHDReprogram SHift Kit with resistor, Superchips performance tune, LS2 4" intake with heat wrap, Hedman LTs 1 5/8 primaries, 3"ORY, Cats Removed, 3" Dynomax Bullet, mcgaughys 2/4 see sig lol Custom painted bumpers, shaved and painted grille shell, rumble bee grille inserts, Debadged,Tinted windows, 5% front windshield sun brow, MB gunner 5s, Road hugger 275/55R20s, Taylor shorties, Bosch platinum plugs, 2 inch drop in back, overloads removed, Pioneer 6 disc w/remote, 600w amp with 2 12inch subs |
||||
|
|
|
Well I have a slight vibration at full throttle. It's not bad but I am about to weld the spring perches and I want to get set right. I used a flip kit and it's easy to adjust. I geuss I will adjust it until it's smooth.
03 ram, 20' wheels, K&N cold air intake, flowmaster super 44 exhaust, custom tailgate pin-stripping, lowered 2'-4', Mtx 10's and amp in a custom box, 10 pin upgrade, Bully dog power pup programmer, de-bagged, and billet grille |
|||
|
|
President Kansas Chapter  |
-2? I hope you don't mean in the angle of a mountain, if you get my analogy.
 "Ability is what you're capable of doing. Motivation determines what you do. Attitude determines how well you do it." - Lou Holtz Support a fellow members good cause. www.lexislamb.org     |
|||
|
|
Truck of the Month May 2006 Texas Chapter Court Jester  |
http://www.carcraft.com/howto/91758/index.html
http://www.quickperformance.com/Technical%20Info/Pinion_angle.htm 2007 SRT8 Jeep Grand Cherokee-Red Rock 12.58 1/4 w/MHP-B&G CMR TUNE/ BWoody Intake only mods  |
|||
|
|
President Kansas Chapter |
Good links Wade.
 "Ability is what you're capable of doing. Motivation determines what you do. Attitude determines how well you do it." - Lou Holtz Support a fellow members good cause. www.lexislamb.org |
|||
|
|
|
Thanks alot for all the help. The links that were posted really helped. I thought I had the pinion angle thing figured out but i'm glad i know how to really do it now. THANKS
03 ram, 20' wheels, K&N cold air intake, flowmaster super 44 exhaust, custom tailgate pin-stripping, lowered 2'-4', Mtx 10's and amp in a custom box, 10 pin upgrade, Bully dog power pup programmer, de-bagged, and billet grille |
|||
|
| Previous Topic | Next Topic | powered by eve community |
 | Please Wait. Your request is being processed... |
|
|||
| Site | HTC.com Forum | ||
| Servlet | eve2da022 | ||
| Version | 1.2.22 build 9062 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "Merchant" | ||
| Wordlet Set | "Default Wordlet Set" | ||
|
Copyright HemiTruckClub.com 2008