Moderators: MrHemi
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
 |
Hey guys, I installed a 2/4" GF kit on my 04 4x4, it looks 100% better, but its been bugging me for a while, its not QUITE level, the back seems to be a bit higher, maybe an inch. Is there a safe way to drop it 1 more inch? Or am I just losing it?! What do you guys think?
-eric EDIT: its hard to tell from my sig pics, cause i got down real low to take them. When your standing beside it, its more noticable My Truck:   |
||
|
  |
Dang man, looks prety level to me, mabey a half inch diffrence???
how did the lowering kit lower the back end? might be a matter of making new shackles or adding a shim to push the axle up further. some pics of the rear axle and springs would help a ton! ps. nice ride! 06 QC 4X4 Hemi Ram Custom Cold Air Intake, Electric fan conversion, Custom catch cans, Bully Dog Power Pup, 3" Body Lift, Kicker 10" sub, Kicker 500.1 amp, custom sub enclosure, custom adjustable towing hitch......more to come will weld for food     |
|||
|
"John Boy" |
Looks friggin awesome to me! NCIE truck...
I had that stock 20" spares look at one time... But they were too heavy for me. . . . ------------------------------------------------------------------------------------------------------ HTC.com Titan Killer Club , HTC.com Ricer / Tuner Killer Club , HTC.com Mustang GT Killer Club ------------------------------------------------------------------------------------------------------ "I think of myself as an intelligent, sensitive human being with the soul of a clown which always forces me to blow it at the most important moments." -- Jim Morrison of The Doors ------------------------------------------------------------------------------------------------------ MODS: I've got a few, but I need more... Anyone willing to contribute to my addiction?   ------------------------------------------------------------------------------------------------------      |
|||
|
 |
looks awesome seeing a 4x4 with that stance, did you take out the overload spring from the rear if you have one??
Rich's: 2007 Black Pearl Quad 1500 Sport Hemi 4x4. magnaflow exhaust, edge evolution, 3rd strike intake, |
|||
|
|
"Ken" Secretary California Chapter |
A lot of flip kits have 2 slots on there drop shackles,one is for a 4 inch drop,the other for 4.5 inches. If yours does not have 2 slots,and you want to lower it further,you could remove the leaf that is above the overload,that is usually good for an extra one half to 3/4 of an inch. But,beware-you may have some bottoming out issues if you go past the 4 inch drop height.....
04 Atlantic Blue RC/SB-1500/2wd -4.10's/lsd/17's,Superchips,PSC-001,Ramhammer,Airram scoop,JBA headers,custom y-pipe, Magnaflow muffler(SI/DO)dumped, Comp 260 cam,6.1 springs,6.1 pushrods,180 t-stat,NGK 4306's,Taylor shorty's,Western Chassis 2/4 drop,and a few things not yet installed...... |
|||
|
 |
If I may ask, where did you get the 2/4 and how much did it run you? I'm looking to lower my 08 4x4 and seeing yours just makes me want to do it even more.
08 QC 4x4 DiabloSport u7137 K&N drop in Flowmaster exhaust and plasmaglows |
|||
|
| Powered by Eve Community |
 | Please Wait. Your request is being processed... |
|
Copyright HemiTruckClub.com 2009