
HTC.com Forum
Forums
Towing & Hauling
Trailering/Hitches, etc.
4 to a 7 pin connector...|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
I might have put this in the wrong category but I have a 07 ram 1500 thunder road that has the towing package but i have a flat 4 pin connector. I recently got a 7' x 16' trailer that has a 7 pin connector. I was wondering if anyone knew a way to convert the 4 pin (male side) of my truck to a 7 pin connector so i can have lights on the trailer when i pull it. Thanks for you help with this matter.
|
|||
|
|
|
any trailer place will have a adapter
2004 hemi sport mbrp exhaust, taylor shortys, purple neons, airaid, k&n, bilstein shocks, hellwig sway bar, kc lights&bar, cobra-cb, Hypertech Power Programmer III http://hemitruckclub.infopop.c...0094352/m/8580046295 |
|||
|
|
Sales Manager White Marsh Dodge |
The 07 Ram has a 4pin concetor tucked up under the bumper just left of the tag.
Sales Manager White Marsh Dodge (410-335-2301) jamesd@sandsauto.com, 03 Ram 4x2 reg cab HEMI,hedman hedders, 4.56 gears, Superchips programer, ported TB, 305/50/20's (rear), 285/50/20'S (front)custom k&n air intake, magna flow, lowered, bed rug, t cover, front air dam, HEMI billboard (painted on), 6.1 cam (srt-8), 6.1 heads(srt-8), Custom hood, Daytona Wing (cut down), 06 fuel pump, Tayor shorty wires, Xplode amp and 10" sub, Transgo shift kit, TCI converter, more to come. The Boss (wife) has a Hemi too. Her ride is a 06 Daytona Charger in Top Banana. No mods. (yet) update Superchips installed, Flowmaster cat back. And a SRT-4 Kill |
|||
|
|
|
Yea do what JamesD said. Mine was stuck way up out of sight but if you look around it's up there.
2007 4X4 Quadcab Detonator Yellow Sport Hemi of coarse,rhino lined,EZ down,nerf bars,driving lights,one tap |
|||
|
|
VP Ohio Chapter |
He's saying he has a 4 pin on the truck and a 7 pin on the trailer.
I don't think anyone makes an adaptor to go that way, but if the truck has a tow package it should have a 7pin recepticle already mounted to the bumper. If not you can pick one up at any camping or trailer store as well as WalMart. Then just wire the 4 wires for the lights into the wiring for the 4 pin. HEMI's and Wings Nothing better for a Sunday Drive Homemade front tilt hood with mini MOPAR Pro Stock Style hood scoop, Self made air intake, Carr Hoops steps, Glasscapes window treatment, AVS chrome taillight covers and in channel visors, custom dual exhaust with Dyno Max muffler and cutouts, custom 'hockey stick' graphics, SportMaster Tonnue cover,ECCO 80w Corner strobe Kit, VR3 Back up camera system, MOPAR Rear wheel well liners, Superchips3815,purple neon underbody kit and windshield washer LED's |
|||
|
|
|
The dealership put my 7 prong on. It is the factory 7 prong and it plugs into the 4 prong that is already there, no additional wiring needed. Check with a Dodge dealer.
2005 QC/SB, SLT 4x4, Flame Red with step tubes, Access Tonneau Cover, basically still stock with the Borla exhaust system. Being a Emergency Medical Professional I feel qualified to say "Hemi it is faster than the "Heartbeat of America"" |
|||
|
|
|
You can buy a 7-Pin housing that is prewired for a 4-pin to hook in the back which means you don't have to wire the housing. Makes install a snap. Just mount it in the bumper where the factory 7-Pin would have been. Will take you less than 10 minutes start to finish. http://www.etrailer.com/pc-A~30717.htm ____________________________________________________ 2008 Ram 1500 5.7L HEMI 4WD Quad Cab SLT 20's & 3.92's MOPAR Step Bars/BedRug/Mud Flaps * Weathertech Floor Liners * Laramie Dash Bezel * Push Button Start * Undercover Hard Tonneau * Borla Dual Exhaust w/ Vibrant Dual Outlet SS Tips * Elite HEMI Hitch Plug * Firestone Destination LE's Royal Purple #1 |
|||
|
| Powered by Eve Community |
| Please Wait. Your request is being processed... |
|
HTC.com Forum
Forums
Towing & Hauling
Trailering/Hitches, etc.
4 to a 7 pin connector...
