A couple of pics. The knobs are very well made and have a beautiful finish. The pictures don't do them justice at all. I'll get better pictures this weekend in natural light. They install over the OEM knobs. The headlight and radio knobs were a snap to install. Not so easy for the AC knobs. One installed flushed. I had to use some serious super human strength and my kitchen table as leverage to push the other two knobs flush in the covers.


They compliment the silver bezel in my truck and the billet pedals. Overall, an excellent mod. I ordered these from Bob, at Moe's. As always, his customer service is impeccable. Definitely pick them up from him.




Sil

This message has been edited. Last edited by: MrHemi,

2nd pic...

This message has been edited. Last edited by: MrHemi,

That looks great

Thanks guys.

What would be a good cleaner for billet? Nothing harsh. Just something to clean smudges.


Sil

They look good Sils...Bob usually has good stuff. I have solid billet knobs and clean them with what ever is handy. They clean up real easy, then a coat of polish.

Thanks Doug.


Sil

Sil. Looks real good!

Looks good Sil!!

Thanks again guys!


Need some opinions.

I want to even out the look and get a cigarette lighter delete for the 12V plug. The one I have for the cigarette lighter says Hemi, but it wasn't made by BT.

Should I have the other one engraved with 12V, Hemi or the Mopar M? I'm thinking just 12V, because I don't know how close the fonts will look in comparison to the other plug.


I talked to Scott today at Billet Technologies. Very nice guy!


Sil

Here are a couple more pics with better lighting. Gives you a better idea of the satin finish.



Sil

This message has been edited. Last edited by: MrHemi,

2...

This message has been edited. Last edited by: MrHemi,

here's mine from B.T I i just got the plan finished one

i got this one for the cig lighter lol yea and scott and chris are some great guy's at B.T

Nice billy! where did you get the 345hemi decal?????

This message has been edited. Last edited by: danitolaboy,

Billy,


How does the cig lighter delete install? I'm looking to get one for the 12V.

My hemi cig lighter delete (other manufacturer) actually plugs in.


Sil

Sil,

what is the web address for B.T. please?

Danny

Danny,


You can order them from Bob, at Moe's, here:

http://moesperformance.com/index.php?main_page=index&manufacturers_id=272

Here's their direct site:

http://www.custombilletstore.com/product_p/1090.htm


Sil

Thanks!

Sil, is that an oem center console? Would like to see more pictures of that. The billet knobs look good. I have the same accent color, makes me want to do the same.