Banners HemiTruckClub.com Website DiabloSport Website Superchips Website Henson Motor Sports Website 3rd Strike Performance We Support Our Troops United States of America Canada United Kingdom Belgium Iceland France Germany Puerto Rico South Africa Guam Netherlands

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Drivetrain info  Hop To Forums  Other Drivetrain talk    clicking noise

Moderators: MrHemi
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Picture of HEMIHP
Posted
So i noticed when i replaced my front brakes the other weekend i would spin the bearing hub and it would make a clicking noise. But it sounds almost like it supposed to be thier. Is it normal or do yall think i got bearing problems?


2004 DODGE RAM QUAD CAB
LONESTAR EDITION
MOLTEN RED PEARL
20" FACTORY CHROME RIMS
DEBADGED EXCEPT FOR THE HEMI'S
AT3030 DUMPED
TAYLOR SHORTIES W/ NGK PLUGS
CAI

 
Posts: 131 | Location: College Station, Texas | Registered: 07 November 2007Reply With QuoteEdit or Delete MessageReport This Post
"Rob"



VP
Alaska Chapter
Picture of rdsetgo
Posted Hide Post
I would say bearing problems starting!!



2008 Dodge Durango 4x4 SLT HEMI and 2007 Dodge Ram 1500 4x4 SLT Quad Cab HEMI
www.lubedealer.com/99705/

April 25, 2007!!
 
Posts: 6780 | Location: North Pole, Alaska | Registered: 18 October 2008Reply With QuoteEdit or Delete MessageReport This Post
"Justyn"



Picture of JustHemi
Posted Hide Post
Someone else just had a post on replacing front bearings. Consensus says to just replace the hub. Much easier and under $100. Some special tool is needed I guess to separate the ball joint and tie rod end up front to get to the bearings and it is like $180. Supposedly the hub is plug and play. Just make sure you get the one for ABS with the sensor on it. I assume most of these trucks if not all of them would need that.


Amsoil Dealer (Greenwood, IN)
Ph#: 317-383-6061
05 Atlantic Blue 1500 4x4 QC
Superchips, Dynomax Bullett, 3rd Strike intake, Taylor Shorties, NGK 2314 Iridium plugs, 180 t-stat, Amsoil'd out, Tinted windows, torsion lifted, debadged, billet antenna, billet fuel door, Billet front/rear cup holders, tinted 3rd brake light, Ventshades, Line-X, Alpine 9885, Kicker KS series 5.25, and 6.5 components, Kicker KX350.2 amp, Kicker 12" DVC Comp VR
Future Dodge Challenger owner...if I am rich or gas prices drop....
Many mods to come....hehehe.

 
Posts: 5315 | Location: Greenwood, IN | Registered: 01 February 2005Reply With QuoteEdit or Delete MessageReport This Post
Picture of afteamroper
Posted Hide Post
iagree but check your ABS sensor wheel to make sure it is not rubbing and make sure something else is not rubbing in there


2006 Black Mega Cab
Current mods: Access tonneau cover, 3rd Strike CAI,Tekonsha PRIMUS Trailer Brake Controller, Sumitt Turbo Muffler, Tow Mirrors, Tranny Temp Gauge in SRT A Pillar, 3950 Cortex Superchip, Tinted front windows
Pending Mods: Nerf Bars and sprayed in bed liner and what ever else i find on here

 
Posts: 1151 | Location: Hill Air Force Base UT | Registered: 24 March 2009Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community  
 

HemiTruckClub.com    HTC.com Forum    Forums  Hop To Forum Categories  Drivetrain info  Hop To Forums  Other Drivetrain talk    clicking noise

Copyright HemiTruckClub.com 2009