How hard are these to put on? Any tips/tricks to get them on and get them on straight? Im thinking of getting a set for my hood and a set to throw on my tonneau cover too (it has the same lines as the hood does).

This message has been edited. Last edited by: Truckin151,

soapy water in a spray bottle, a buddy with a good eye, blue painters tape, and a plastic peice with tappered edges to squeze out the soapy water and patients you should be good

step 1 take the painters tape and put a couple of peices on the paper covering the out side of the sticker where you want the sticker to be

step 2 step back lok at it from meany angles making sure it is where you want it ( this is where the buddy with the good eye comes in)

step 3 fold back the sticker using the painters taperemove the backing on the sticker srray the area where the sticker is going with the soapy water ( cover it generously )fold the sticker in to place. look at it again this is where you can make adjustment to the placement if needed the soapy water will let you move it around with out damage.

step 4 leeaving the outer waxy paper on the the sticker take the plastic sraper and squeze out the soapy water making sure to get all the air bubbles out when you are confident you got the bubbles out remove the outer paper of the sticker step back if air bubles still remaine take the soapy water and spray the sticker getly work the bubles outif only small bubbles remain leave the truckin the sun it should remove them.

step 5 repeat till all stickers are on

step 6 take pics and let the rest of us see your work any moer questons let us know

Good job raceram!

Sweet thanks a lot man!

no problem any time i can help

raceram said it all